1. 提出了将除法电路转化为乘法电路实施逆推攻击的思想,并给出了一种具体的转化方法。
Idea that changing division circuit into multiplication circuit is advanced, and a translating form is found at present.

来自互联网

2. 中新世以来,双河组(N1s)地层的褶皱走向为NE向,此期间盆缘主断裂变为左旋逆推性质;
Since the Miocene, the fold in the Shuanghe group (N1s) stroke in NE when the main fault on the basin rim changed into sinistral thrust.

来自互联网

3. 研究了多重化变器的一种控制方法,采用逆推的方法确定各单元的触发脉冲,通过多重移相叠加原理得到正弦波输出。
A new control method of multiunit inverter is described, which determines the triggering pulse for each unit to obtain the sine wave output through multiple-phase shifting superimposition principle.

来自互联网

4. 文中把本区和典型的覆构造作了对比,并断了这种缓倾角断层的演化模式。
The authors compared the structures of this area with the typical nappe patterns and proposed a evolution model of the low Angle faults.

来自互联网

5. 覆构造系统沿八家子盆地东缘和北西缘分布,控制铅锌矿床的就位与分布,为成矿期构造。
Thrust nappe system, extending along southeast and northwest margin of Bajiazi basin. controls the emplacement and distribution of Pb-Zn deposits, so it is metallogenic structure.

来自互联网

6. 利用最大熵谱估计的方法对四种飞机目标数据进行外处理,并在此基础上进行合成孔径成像。
The maximum entropy method is adopted to extrapolate data, and ISAR image is obtained based on this.

来自互联网

7. 覆构造由覆体系、前缘带、前缘外带和原地岩体四部分组成的。
The over thrust nappe consists of four parts: nappe system, front zone, outer front zone and autochthon.

来自互联网

8. 覆体由根带、主冲带和冲传播前缘带三部分组成。
The thrust nappe is assembled by root zone, major thrust zone and thrust front.

来自互联网

9. 覆构造体系是由几条冲断裂带及其冲席、冲片组成,主干断层与次级断层组成叠瓦式构造。
The structural system of nappe consists of several overthrust fracture belts, thrust sheets and thrust slices, and master fault and secondary fault form an imbricate structure.

来自互联网

10. 南缘覆带是三塘湖盆地油气勘探的主攻区带之一。
The overthrust belt at the south edge of Santanghu basin is the main exploration target.

来自互联网

11. 由北向南分为前缘挤压滑脱构造带、斜歪倒转褶皱—冲断层带和覆岩席及叠瓦状冲断层带。
From north to south, several tectonic belts can be distinguished: front compressive detachment belt, overturned thrusting belt, sheeted thrusting belt and imbricate thrusting belt.

来自互联网

12. 宁镇,茅山山脉褶皱冲一覆构造带的构造岩类型主要为碎裂岩系列,其次为糜棱岩系列。
The main type of tectonites in the belts of fold thrust - nappes in Ningzhen, Maoshan mountains is the cataclasite series, and then mylonite series.

来自互联网

13. 北秦岭为一复杂构造带,形成向北反转的叠瓦状覆构造。
The north Qinling is a complicated structural zone, forming an imbricated thrust napped structure overturning northward.

来自互联网

14. 野外判定岩浆岩地区覆构造的主要标志是冲叠瓦扇和软弱滑动层的存在。
The imbricate fan of thrusts and soft layer are main structure features distinguishing thrust-nappe structure in magma-tic body area.

来自互联网

15. 汝州煤田位于华北板块南缘覆构造带豫西段前锋部位,区内覆构造较发育。
The Ruzhou coalfield lies at the front part of thrusting nappe structural zone western Henan sector, south margin of the North China plate.

来自互联网

16. 该文认为,阿尔金山走滑断裂构造是一巨型左行左列走滑断裂兼覆和韧性剪切性质的断裂构造带。
This paper considers that Aerjin Mountain strike-slip fault structure is a huge tectonic zone with the property of left active anticlockwise and thrust nappes and ductile shear zone.

来自互联网

17. 然后分析区域构造特征和展布格局,特别强调覆断裂的重要性;
Then, the regional structure characteristics and distribution pattern are analyzed and the importance of thrust nappe fault is emphasized especially.

来自互联网

18. 喜山期持续的区域应力作用使那里沟背斜SE翼沿软弱面断裂,经递进扩展变形,最终形成覆构造。
The SE limb of Naligou anticline was fractured in the action of persistent regional stressing and expanded into detachment-thrust structure during Himalayan orogenic period.

来自互联网

19. 目前,应用重力资料研究覆构造,多采用重力延拓法、重力模型正演法和重力、地震综合解释法。
In present gravity exploration of overthrust nappe, people usually use gravity continuation method, forward gravity modelling method and integrated gravity-seismic interpretation method.

来自互联网

20. 当时外至最小成像时间时,就能得到整个剖面的偏移结果。
The complete migration of a seismic section is achieved when reverse-time extrapolation reaches the minimum image time.

来自互联网

21. 盐上构造包括盐上滚动背斜、断弯-断展背斜、背冲断块、冲断层遮挡构造和盐覆构造等;
The suprasalt structure includes suprasalt rolling anticline, fault-bending anticline, suprasalt pop-up, thrust screened structure and salt nappe.

来自互联网

22. 我们将层间滑动—切层滑动—掩断层—覆构造这—滑动构造系列称之谓层滑构造。
We call a system of sliding structures, including bedding slip-dessecting slip-overthrust-nappe structure, as the layer sliding structure.

来自互联网

23. 扬子大陆与秦岭造山带之间的壳内构造边界不具陆内俯冲性质,而是复一走滑构造带。
The tectonic boundary between the Yangtze Continent and Qinling orogenic belt is a thrust-strike slip tectonic zone rather than a intracontinental subduction zone.

来自互联网

24. 进一步分析,这些沉降中心的形成明显受到了周缘山系覆作用的构造负载和盆地基底构造的制约,使盆地形成了隆坳相间的古地貌格局。
The formation of these quick subsidence centers were obviously controlled by the tectonic load derived from the adjacent orogenic thrusting and preexisting tectonic blocks in the basin basement.

来自互联网

25. 它们是华力西—印支期板内覆构造所形成的断裂变质岩。
They are fault metamorphic rocks formed in thrusting nappe structure inside continental plate during Variscan-Indonian Stage.

来自互联网

26. 漠河覆构造发育在上黑龙江盆地的西北侧,是漠河地区的主要构造样式。
The Mohe thrusting tectonics is developed on the north-western of the upper Heilongjiang Basin, it is the main structural styles in Mohe region.

来自互联网

27. 通过对东大滩—东温泉地区的路线地质观测与构造填图,在东昆仑南部发现晚新生代大型覆构造系统。
A large-scale Late Cenozoic overthrust system has been found in the southern East Kunlun Mountains through tectonic mapping and geological reconnaissance in the Dongdatan-East Wenquan area.

来自互联网

28. 次级断层和一些相关伴生构造(擦痕线理)的特征表明了本区覆构造系统的冲方向为南东-北西向。
Thrusting direction of this system is from southeast to northwestjudging by some characteristics of secondary faults and the associated structures (scratchlineation).

来自互联网

29. 临床应用时,可以单手做顺经或经的单方向用力直,有补虚泻实的治疗作用;
Clinically, the doctor may use one hand to push along or against the course of the channel in one direction. It has the function of treating asthenia and reducing sthenia .

来自互联网

30. 临床应用时,可以单手做顺经或经的单方向用力直,有补虚泻实的治疗作用;
Clinically, the doctor may use one hand to push along or against the course of the channel in one direction. It has the function of treating asthenia and reducing sthenia .

来自互联网