1. Focal mechanisms demonstrate that most are of thrustfault and next the normal.
几百次单个地震的震源机制解显示出以逆断层和正断层机制为主。
来自互联网
2. The south Qinling has formed an imbricated thrust fault at low angle from the north to the south.
南秦岭自北向南产生低角度叠瓦状逆冲断裂。
来自互联网
3. The tear fault intersected with low angle normal fault or thrustfault can form some traps, e. g. trap-door structure trap.
撕裂断层与低角度正断层或逆冲断层相交时常形成有利圈闭，如活板构造等。
来自互联网
4. It was considered that method of equilibrium profile is the best method to recognize and quantitatively study active thrustfault and underlying fault.
而平衡剖面法乃是识别和定量研究活动逆断层，特别是隐伏断层的最好方法。
来自互联网
5. The trend of the high anomaly in south west area of the study region is basically same with the thrustfault, so we infer that the anomaly is caused by it.
6. The Changpo reverse anticline controls the location of Changpo-Tongkeng deposit, while the bed-parallel shear fracture zone and thrustfault control the ore bodies.
长坡倒转背斜控制长坡-钢坑矿床的产出，层间剪切破碎带和逆掩断层控制着矿体的空闻位置。
来自互联网
7. Structural characteristics of inversion structure, fold association style, thrustfault zone upright strata developed belt shown in great profiles were also discussed.
对剖面中反映的构造反转、褶皱组合样式、逆冲断裂带、直立地层发育带的构造特征进行了探讨。
来自互联网
8. There is a normal deposition sequence stratigraphy beneath the lower wall of over-thrustfault, such as Jurassic, Triassic, Permian-Carboniferous, Cambrian-Ordovician system.
9. The stress fields are compression ones, in that conditions, the structure styles are folds, Fault-bend folds, Fault-Propagation folds, Detachment folds, imbrications-thrust faults and so on.
10. The Luochen Copper Mine is situated at the composite part of the protruding south front of the large scale thrust( slip) nappe and the NNE-trend strike-slip thrust fault in the south edge of Jiuling.
罗城铜矿区处于九岭南缘大型推（滑）覆构造往南突出的前锋与NNE向走滑冲断带复合部位。
来自互联网
11. The most efficient structural assemblage zone for gas accumulation is the thrust fault and nappe thrust belt developed in a variety of salt-related due to tectonic compression and salt flexible fluid.
根据与其它气田构造的对比，穿盐断裂和叠瓦冲断带的构造组合样式对油气的聚集最为有利。
来自互联网
12. The suprasalt structure includes suprasalt rolling anticline, fault-bending anticline, suprasalt pop-up, thrust screened structure and salt nappe.
盐上构造包括盐上滚动背斜、断弯-断展背斜、背冲断块、逆冲断层遮挡构造和盐推覆构造等；
来自互联网
13. First, an expert system of fault diagnosis is set up by summarizing symptoms and their direct reasons for axial displacement fault and by combining them to the tilting pad thrust bearing performance.
14. The structural system of nappe consists of several overthrust fracture belts, thrust sheets and thrust slices, and master fault and secondary fault form an imbricate structure.
推覆构造体系是由几条逆冲断裂带及其逆冲席、逆冲片组成，主干断层与次级断层组成叠瓦式构造。
来自互联网
15. Then, the regional structure characteristics and distribution pattern are analyzed and the importance of thrust nappe fault is emphasized especially.
然后分析区域构造特征和展布格局，特别强调逆冲推覆断裂的重要性；
来自互联网
16. The structural style found in the basin includes imbricated thrust zone, trapdoor structure, drag fold, listric fault, rollover anticline, horst-graben structure and the like.
17. The Xiluodu Hydropower Station on the Jinsha River is a giant hydropower station, but a thrust nappe structure-Majiahe Dam fault-lies in the reservoir head region.
金沙江溪洛渡水电站为一巨型水电站，库首区发育一逆冲推覆构造——马家河坝断层。
来自互联网
18. This paper considers that Aerjin Mountain strike-slip fault structure is a huge tectonic zone with the property of left active anticlockwise and thrust nappes and ductile shear zone.
该文认为，阿尔金山走滑断裂构造是一巨型左行左列走滑断裂兼逆冲推覆和韧性剪切性质的断裂构造带。
来自互联网
19. Wuxia fault belt in the eastern part of northwestern margin of Junggar basin is an important part in the thrust belt of the northwestern margin.
乌夏断裂带位于准噶尔盆地西北缘的东部，是西北缘冲断带的一个重要组成部分。
来自互联网
20. Fault-bend folds and fault-propagation folds are typical structural styles in the foreland thrust belts.
断弯褶皱和断展褶皱是前陆冲断带中的两种典型构造形式。
来自互联网
21. The main thrust-slip fault belts and the nappe structure zones, thrust sheets and low strain regions lying in between the main thrust-slip fault belts are described in detail.
对主干逆冲断裂带及其间的逆冲推覆体带、逆冲席带和低应变区的特征进行了详细描述。
来自互联网
22. Taking thrust slip fault of Japanese MITSUBISHI electric regenerative cargo lifting in some certain vessel as example, this paper gives analysis and ideas on the fault causes and repair methods.
以某船日本三菱电动回转式起货机冲滑故障为例，分析了故障原因与修理方法，并阐述了若干体会。
来自互联网
23. The MCT1 was originally a south-vergent ductile thrust, which was later transformed into a normal fault after it underwent NNE-trending folding.
MCT1原为向南逆冲的韧性断层，后遭受北北东向褶皱作用而转变为正断层。
来自互联网
24. Mingqiao Oil-field is a fault block &fault nose reservoir which is formed on the condition of complex fault-thrust anticline structure.
闵桥油田是在断层复杂化的断背构造背景上形成的断块、断鼻油藏。
来自互联网
25. The key structure in this area is a duplex that comprises of a shallow fault-bend fold of the Late Triassic and a deep blind stacking anticline imbricated by three thrust sheets of Cenozoic age.
