1. The shorehardness of materials is based on the rebound height of measuring punch pin, in practices the precision can not easily be ensured.
材料肖氏硬度是以测量冲头的回跳高度为依据，实际的测量精度不易保证。
来自互联网
2. Shorehardness A: 22 ISO868 (3 seconds) - Adhesion: primer in the absence of concrete, glass, metal, wood, stone, vinyl chloride on Bonding can also be ideal.
3. The bristles (6) have a high bristle density of at least 6 bristles per square millimeter and consist of a plastic material that has a Shorehardness D of more than 40.
4. The compactness bending strength, compressive strength, shore-hardness of carbon slides impregnated with metals were increased; while open porosity and electrical resistivity decreased.
炭滑板经浸渍金属后，致密性、抗折强度、抗压强度、肖氏硬度明显提高，而开口气孔和电阻率降低。
来自互联网
5. The tensile strength and Shore A hardness decreased with EPDM amount increasing.
随着EPDM用量的增加，并用胶的拉伸强度及邵尔A硬度降低；
来自互联网
6. Shore A durometer use for testing the hardness of flexible materials such as rubber and plastics.
A 型邵氏橡胶硬度计适用于橡胶。塑料及类似硬度材料的硬度测定。
来自互联网
7. The experimental results show that, under vibration force field, tensile strength, tensile stress at 100% and elongation at break of TPE can be enhanced, and hardness(shore A) of TPE can be improved.
8. The compactness bending strength, compressive strength, shore-hardness of carbon slides impregnated with metals were increased;
炭滑板经浸渍金属后，致密性、抗折强度、抗压强度、肖氏硬度明显提高，而开口气孔和电阻率降低。
来自互联网
9. Shore a is the most common method of evaluating rubber hardness in North America.
ShoreA在北美地区是一种常用的评定橡胶硬度的方法。
来自互联网
10. The equipment is automated (and quite expensive,) but the results are repeatable and generally consistent with Shore a results within about five hardness points.
11. The results showed that the filling of short fiber evidently improved tear strength, modulus at 10%and Shore A hardness of SFRC.
结果表明，短纤维的加入显著提高了SFRC的撕裂强度、10%定伸应力及邵尔A型硬度；
来自互联网
12. In general, the tensile strength and Shore A hardness of PVC/CPE/black liquor powder composites were increased while the elongation at break was slightly decreased after thermo-oxidative aged.
添加黑液干粉的复合材料，在热氧老化后拉伸强度和邵尔A型硬度增加，断裂伸长率稍有下降。
来自互联网
13. In general, the tensile strength and Shore A hardness of PVC/CPE/black liquor powder composites were increased while the elongation at break was slightly decreased after thermo-oxidative aged.
