1. To create an resetinput to the supervisory chip, its input must receive an active-low ground signal, requiring transistor Q1 to turn on.
为管理芯片产生复位输入，其输入必须接收低有效的地信号，需要晶体管q 1导通。
来自互联网
2. The purpose of this method is to store the currently displayed number into the accumulator, to store the specified operation as well, and to reset the display for input of the next operand.
3. In a case where a transformation begin, but aborts before completion, there are no facilities to guarantee that this condition will result in the reset of all input parameters to their previous state.
4. Otherwise, the original character is placed in the output stream, and the input stream is reset to the original position.
否则，将原来的字符放到输出流中，并且将输入流重置到原始位置。
来自互联网
5. A reset is necessary because, with this method, parsing begins at the ParsePosition index within the input string.
重置很必要，因为使用此方法时解析开始于输入字符串的ParsePosition索引。
来自互联网
6. By using an active clamp circuit, the power transformer core is symmetrically reset. Zero voltage switching conditions are achieved over a broad input voltage and output current range.
利用有源钳位电路实现主变压器铁心对称复位，功率开关在宽输入电压和宽负载电流范围内零电压开关。
来自互联网
7. It includes the time-base circuit, time set and delay circuit, input interface, clear and reset circuit etc.
内容包括时基电路、预置延时电路、输入接口、总清及加电复位等。
来自互联网
8. The only time it's called for is in a form that the same user USES over and over again with different input. If you use a Reset, also try to provide an undo function.
9. Its function is to provide a latching switch action upon sensing an input threshold voltage, with reset accomplished by an external clock signal.
它的功能是当感应到输入电压界限时提供一个锁存开关，通过外部时钟信号完成复位。
来自互联网
10. Reset clears away the user's input on a Web form, but why would people want to do that?
重置功能会把用户输入到表单中的所有信息清除掉，但为什么用户要使用这样的功能呢？
来自互联网
11. The request has been completed, and the client program should reset the document view that caused the request to be sent to allow the user to easily initiate another input action.
请求已完成，客户端程序应重置文档视图，以便发出请求允许用户轻松启动另一输入操作。
来自互联网
12. Thereafter, in normal operation, you can configure the MCLR pin either as an external reset or as an input-only pin.
然后，在正常工作中，可以配置MCLR引脚为外部复位或仅作为输入引脚。
来自互联网
13. Thereafter, in normal operation, you can configure the MCLR pin either as an external reset or as an input-only pin.
