- 1. Assume we wish to copy data from /opt/pluto on the local host to the remote host nordkapp filesystem /opt/pluto.
- 假设我们希望将数据从本地主机上的 /opt/pluto复制到远程主机北角文件系统 /opt/pluto。
来自互联网
- 2. We need to ping the remote host to activate the tunnels.
- 需要ping远程主机以激活隧道。
来自互联网
- 3. Executing a single command on a remote host (replacing RSH).
- 在远程主机(代替rsh)执行单一命令。
来自互联网
- 4. The connection is established to the remote host on TCP port 22.
- 建立到远程主机的TCP端口22的连接。
来自互联网
- 5. Figure 2 depicts state after you launch Screen on the remote host.
- 图2显示在远程主机上启动Screen之后的情况。
来自互联网
- 6. For example, see Listing 6 to run the who command on a remote host.
- 例如，要在远程主机上运行who命令，请参见清单6。
来自互联网
- 7. To connect to the remote host tardis as an anonymous user, you can use.
- 可以使用以下命令作为匿名用户连接远程主机tardis。
来自互联网
- 8. The product can be used as a remote host, separated from the Web server.
- 该产品可以用作远程主机，与Web服务器分开。
来自互联网
- 9. This example connects a client (localhost) to a remote host (192.168.2.100).
- 这个例子将一个客户机(本地主机)连接到一台远程主机(192.168.2.100)。
来自互联网
- 10. Copying files from a local server to a remote host by way of the SCP command.
- 通过SCP命令将文件从本地服务器复制到远程主机。
来自互联网
- 11. You can also test whether the file or directory on the remote host is present.
- 还可以检查远程主机上的文件或目录是否存在。
来自互联网
- 12. An NFS-mounted directory became unavailable when a remote host was turned off.
- 当一个远程主机关闭时，一个nfs加载的目录将变得不可用。
来自互联网
- 13. Looking at Figure 1, assume that you have used SSH to log in to a remote host.
- 看一下图1，这里假设用户已经使用SSH登录到一台远程主机。
来自互联网
- 14. It then selects a remote host and sends the SubTask instance there for execution.
- 它选择一台远程主机，并将SubTask实例发送到这台主机上执行。
来自互联网
- 15. The product can be installed in a remote host, separated from the Web server host
- 产品可以安装在远程主机，与Web服务器主机分开
来自互联网
- 16. Each control socket is removed when all connections to the remote host are severed.
- 当到远程主机的所有连接都被切断时，每个控制套接字都就会被移除。
来自互联网
- 17. In all of the above cases, the system prompts you for a password for the remote host.
- 在上面所有的示例中，系统都会提示您输入远程主机的密码。
来自互联网
- 18. You typically use SSH to allow users to log in to a remote host and execute commands.
- 您通常使用SSH来允许用户登录到一个远程主机并执行命令。
来自互联网
- 19. The file that contains the private key data used to authenticate with the remote host
- 包含用于远程主机认证的私有密钥数据的文件
来自互联网
- 20. The --host option was used to specify the remote host instead of using the URI for it.
- 使用 --host选项来指定远程主机而不是使用URI。
来自互联网
- 21. Forwarding X sessions from a remote host (possible through multiple intermediate hosts).
- 从一个远程主机转发x会话(可能通过多个中间主机)。
来自互联网
- 22. If they're on a remote host, too, you still can try to find out the reason for the crash.
- 如果那些消息同时在远程主机上也存在，您就依然可以找出崩溃的原因。
来自互联网
- 23. To connect to a remote host using the standard shell, you can just type the name of the host
- 要使用标准Shell连接到远程主机，您只需键入主机名
来自互联网
- 24. What happens if you need to upload or download data between your workstation and the remote host?
- 如果需要在您的工作站和远程主机之间上传或下载数据，会发生什么？
来自互联网
- 25. Listing 9 shows a partial script example in which a connection is made to the remote host tardis.
- 清单9所示的部分脚本示例连接远程主机tardis。
来自互联网
- 26. To use the file to connect to a remote host, you could issue ncftpput with the following example.
- 以下示例通过ncftpput使用这个文件连接远程主机。
来自互联网
- 27. Note: for the NCFTPLS utility, you must use the previous format when connecting to the remote host.
- 注意：对于ncftpls实用程序，在连接远程主机时，必须使用前面的格式。
来自互联网
- 28. If the input binding parameter is not NULL, then it means that the endpoint resides on a remote host.
- 如果输入绑定参数不是NULL，就意味着端点在远程主机上。
来自互联网
- 29. To record packets received on an interface en0 from a remote host airmail over the telnet port, enter
- 要想记录en0接口上通过 telnet端口从远程主机airmail 接收的数据包，输入
来自互联网
- 30. A remote host key is identified and matched to the entry in the local known_hosts file for that host.
- 找到远程主机密钥并与本地known_hosts文件中此主机的条目匹配。
来自互联网
