3. One decision that the IT team made is to begin phasing out the shelf-top servers in favor of rack-mounted hardware.
IT团队进行的一项决策是，开始逐渐将台式服务器淘汰，使用机架安装的硬件加以替代。
来自互联网
4. Of course, you're not going to be doing a lot of GPU programming inside your pizza-box rack-mounted Web server.
当然，你不会在你的比萨饼盒大小的机架式网络服务器上经常使用图形处理程序。
来自互联网
5. Create a clothes-hanging section in your laundry room with a wall-mounted drying rack that retracts when not in use.
在洗衣间里留一块挂衣服的空间，包括一个可以在不用的时候收缩起来的壁挂式晾衣架。
来自互联网
6. In test runs of the device, the depth camera was affixed to a head-mountedrack that is anything but inconspicuous.
在这个设备的测试中，敏感相机被固定在一个不引人注意的头戴式支架上。
来自互联网
7. The most common computer rack form-factor is 42u high. This limits the number of devices directly mounted in a rack to 42 components.
最普通的电脑机架的外形尺寸是42u高度。这就限制了直接安装在装有42个群组件的机架中的设备数量。
来自互联网
8. When compared to traditional rack-mounted servers, blade servers are smaller, use more power, and require more cabling.
相比传统的机架式安装的服务器，刀片服务器更小，使用更多的权力，并需要更多的布线。
来自互联网
9. Contains network equipment racks, as well as equipment that can be mounted in a rack. Use to design or document rack systems.
包含网络设备机架以及可以安装在机架上的设备。用于设计或展示机架系统。
来自互联网
10. Contains network equipment racks, as well as equipment that can be mounted in a rack.
包含网络设备机架以及可以安装在机架上的设备。
来自互联网
11. Surface mounted closers shall be full rack and pinion type, with pressure cast alloy shell, with no more than 53 mm (2 1/8") projection from the door surface."
12. Individual containers should be elevated above the ground, either on a concrete slab or preferably mounted on a wooden or metal rack.
个人的垃圾桶应该离开地面，也可以在水泥台上或有可能的话，固定在木头或金属的挂物架上。
来自互联网
13. Test converters are housed in a bench top chassis, and most can be mounted on an optional 1RU rack panel.
测试变频器装在台式机箱中，大部分可以安装在可选的1RU机架板上。
来自互联网
14. The control system of display and source system are located on the supporting rack, and the computer can be controlled remotely, or mounted on the supporting rack.
支撑架中放置有显示屏控制系统和电源系统，电子计算机可以进行远程控制，也可以安装到支架中。
来自互联网
15. A second rack is mounted for linear movement in the housing. The second rack engages with the second pinion gear such that rotation of the second pinion gear linearly moves the first rack.
