principal axis

双语例句

1. Principal axis adopt the frequency conversion device.
主轴采用变频控制装置。

来自互联网

2. Main products: bearing bracket, principal axis, gearbox and Generator etc.
主要产品：轴承座、主轴、齿轮箱、发电机等。

来自互联网

3. Double row cylindrical roller bearing is applied on machine tool principal axis.
双列圆柱滚子轴承适用于机床主轴。

来自互联网

4. The bearing at the bottom plate center is fixed with the principal axis of the duster.
下盘中间的轴承中以键固定着喷粉机的主轴。

来自互联网

5. Rotating the image according to the inertial principal axis can normalize it in position.
通过计算惯性主轴及图像旋转完成了位置归一化处理。

来自互联网

6. Application: Medium and large size electromotor, engine, principal axis of machine tool and so on.
应用领域：中大型电动机，发动机，车床主轴等。

来自互联网

7. Finally, the discussion is carried out about how to improve the stiffness of central principal axis.
最后，对怎样提高主轴的刚度进行了讨论。

来自互联网

8. The principal axis is installed at the machine shell center of the duster by use of the ball bearing.
主轴以滚珠轴承安装在喷粉机的机壳中心。

来自互联网

9. A stone wall with a water element is introduced opposite the main entry and extends this principal axis.
一堵带有水设计元素的石墙被引入，正对着主入口，将主轴线扩展开。

来自互联网

10. The first one analyzed composing and working principal about low speed control system of principal axis.
第一部分，对主轴低速控制系统的构成及工作原理进行分析。

来自互联网

11. A new circuit used for the grating torque sensor of hydraulic turbine's principal axis system is designed.
针对水轮机主轴扭矩检测系统中的光栅扭矩传感器，设计了一种新型电路。

来自互联网

12. The settle time is related to the Angle of harrow leaf and harrow blade and principal axis speed of drier.
物料在小干燥盘上的停留时间与耙叶和耙刃的角度以及干燥机主轴的转速有关。

来自互联网

13. The fastest rotated speed of principal axis motor of optical disc driver has reached about 12000rpm nowadays.
现今光盘驱动器主轴马达的最高转速约为每分钟12000转。

来自互联网

14. Moreover, a method of analyzing the interference between electrical principal axis and the limbs is introduced.
主要对干涉约束进行了详细的分析与计算，提出了一种计算电主轴与驱动杆之间干涉的方法。

来自互联网

15. The principal axis of one's life is the conformance to the traditional models and rules, which the society leave behind.
个人生活史的主轴是对社会遗留下来的传统模式和准则的顺应。

来自互联网

16. The problem to determine the principal axis of quadratic surface is summed up to be that of finding the stop point of J-function.
并将确定二次有心曲面的主轴问题，归结为求J函数的逗留点问题。

来自互联网

17. This paper optimized the principal axis of the earth auger by ANSYS, introduced the mathematic model and the steps of the optimization design.
用有限元分析软件ANSYS对挖坑机主轴进行优化设计，从理论上说明优化设计的数学模型，并给出具体的设计步骤。

来自互联网

18. Through the exportation electric circuit of the exterior, the principal axis a, B, Z pulse was sent out to the measured numerical control system.
通过外部的输出电路，把产生的主轴a、B、Z脉冲发送到被测的数控系统。

来自互联网

19. The trait of the technics technique and equipment consists in the principal axis of grinding head and the axes of workpiece perpendicular disposal.
本工艺和设备的突出特点在于磨头主轴与工件轴线呈垂直布置。

来自互联网

20. Through changing the structural parameters of the principal axis system, we can obtain the effect of each parameter on the critical rotational speed.
并针对立轴系统各结构参数的改变，得到了分离机立轴系统各结构参数对其临界转速的影响。

来自互联网

21. Because PMT's principal axis is connected with machine base in multi-poles parallel structure, the rigidity of PMT and quality of process are improved.
由于该机床的主轴与机座之间为多杆并联连接，大大提高了机床的刚度，加工质量也有了较大改进。

来自互联网

22. Secondly, we developed the coprocessor TMS320LF2407A to increase the management and the control of the taboret motor and the principal axis and some others.
研制了基于TMS320LF2407A为内核的协控制系统，设计了绣筐电机和主轴电机等硬件控制模块。

来自互联网

23. The models of the connecting rods and principal axis neck are built, and the finite element analyses have been done to them by using ANSYS engineering software.
利用ANSYS有限元分析软件分别建立曲轴连杆轴颈、主轴颈圆角滚压模型，进行变形分析计算。

来自互联网

24. The milling driving device is characterized in that the mill principal axis is directly connected with the output shaft of the hydraulic motor by a joining sleeve.
本实用新型可使整个铣刀主轴组件结构简单、紧凑、具有很强的实用性。

来自互联网

25. The dynamics characteristic of the motorcycle crank module was described by these two parameters - the obliquity of the ellipse principal axis and the unbalance rate.
摩托车曲轴组件动力学特性决定于惯性力椭圆主轴倾角和不平衡率两个参数。

来自互联网

26. The principle of hardware and software on turning error online measuring system controlled by 8098 single-chip micro-computer for principal axis of lathe was discussed.
阐述了8098单片机对车床主轴回转误差在线检测的原理、硬件设计及软件原理。

来自互联网

27. The basic relationship of plastic mechanics of the rigid plastic compressible material under non-principal axis condition was finalized through two different approaches.
本文从两个不同的途径证明了刚塑性可压缩材料在非主轴条件下的塑性力学基本关系式。

来自互联网

28. Principal axis connected with knob is available in shell, whose upper and lower section is respectively configured with synchronous upper and lower concave wheel and shifting fork.
在外壳内，设与旋钮相连 的主轴，其上下段分别装同步的上、下凹轮和上、下拨叉；

来自互联网

29. Principal axis connected with knob is available in shell, whose upper and lower section is respectively configured with synchronous upper and lower concave wheel and shifting fork.
在外壳内，设与旋钮相连 的主轴，其上下段分别装同步的上、下凹轮和上、下拨叉；

来自互联网