- 1. Residual compression ACTS on the plastic deformation layer.
- 残余压应力作用在塑性变形层内。
来自互联网
- 2. The plastic deformation can occur in the eutectic carbides too.
- 共晶碳化物在落球冲击下也能发生一定的塑性变形。
来自互联网
- 3. Metal cutting is the process of plastic deformation and fracture.
- 金属切削过程是切削层金属的塑性变形和断裂过程。
来自互联网
- 4. The theory of crystal plastic deformation involves several facets.
- 晶体塑性成形理论涉及到多方面的问题。
来自互联网
- 5. The plastic deformation of the sheets can be analyzed by SEM images.
- 从变形后的扫描图像可以分析钢板的塑性变形行为。
来自互联网
- 6. Plastic deformation is the ability of bend or deform before breaking.
- 塑性变形就是在断裂前弯曲或变形的能力。
来自互联网
- 7. Hardness is a measure of the resistance to localize plastic deformation.
- 硬度是材料抵抗局部塑性形变的量度。
来自互联网
- 8. The microscope mechanism of plastic deformation has been investigated in detail.
- 对金属塑性变形的微观机制进行了详细研究。
来自互联网
- 9. Plastic deformation concentrates at the ferrite area under the tensile stresses.
- 在拉应力作用下，塑性变形集中在铁素体区。
来自互联网
- 10. Plastic deformation concentrates at the ferrite area under the tensile stress es.
- 在拉应力作用下，塑性变形集中在铁素体区。
来自互联网
- 11. The plastic deformation which is changed with time slowly is named room temperature creep.
- 这个变形是随时间而缓慢变化的，这个缓慢变化的塑性变形就是蠕变变形。
来自互联网
- 12. The large flange gasket is a ring which can produce plastic deformation and has a certain strength.
- 大型法兰垫片是一种能产生塑性变形，并有一定强度的材料制成的戒指。
来自互联网
- 13. These provide important information for studying the plastic deformation of the new solid material.
- 为研究此固体材料的塑性变形提供了重要信息。
来自互联网
- 14. Metal plastic deforming process is a kind of quite complex and large elastic-plastic deformation process.
- 金属塑性加工的变形过程是一个非常复杂的弹塑性大变形过程。
来自互联网
- 15. It was shown that plastic deformation was mainly undergone in ferrite, and pearlite colony could also deform.
- 结果表明，塑性变形主要集中在铁素体中，珠光体团也可发生塑性变形。
来自互联网
- 16. This structure is altered during forging by subsequent processes of plastic deformation and recrystallization.
- 这种结构形成于其后工序的塑性变形以及再结晶过程。
来自互联网
- 17. The soft rock is a complex rock mechanics medium, which has salience plastic deformation in special environment.
- 软岩是一种特定环境下的具有显著塑性变形的复杂岩石力学介质。
来自互联网
- 18. The conceptions and testing methods of the plastic deformation threshold and springback potential are introduced.
- 介绍了型砂塑性变形临界值、回弹势能的概念及其测试方法；
来自互联网
- 19. However, the compression strength and plastic deformation ability decreased when the volume fraction exceeded 60%.
- 钨丝体积分数超过60%以后，压缩强度与塑性变形能力反而下降。
来自互联网
- 20. As shown in Fig. 4.2, grain flow is the direction of the pattern that the crystals take during plastic deformation.
- 如图4.2所示，晶粒流动的方向就是在塑性变形期间结晶排列的方向。
来自互联网
- 21. Plastic deformation pressure is the pressure caused by changing the status of rock from elasticity into plasticity.
- 塑性形变压力是岩石由弹性状态转变为塑性状态所产生的压力。
来自互联网
- 22. Off-line forecast shows that fuzzy neural network has high precision in predicting metal plastic deformation resistance.
- 离线预报表明：模糊神经网络预报金属塑性变形抗力有较高的精度。
来自互联网
- 23. Cracks form in the regions, where shear deformation is larger, after the plastic deformation accumulates to some degree.
- 裂纹于塑性变形积累到一定程度之后，在切变变形较大的区域表面形成。
来自互联网
- 24. Experiment of plastic deformation is done on press and double heat preservation measure is used during plastic deformation.
- 焊接接头的塑性变形试验在油压机上进行，变形过程中采用了双保温措施。
来自互联网
- 25. Forging is the process by which metal is heated and is shaped by plastic deformation by suitably applying compressive force.
- 在锻造过程中先将金属加热，然后施加合适的压力使其塑性变形。
来自互联网
- 26. The spinning process of splitting V type belt wheel involves movement of multi-body and couple of elastic-plastic deformation.
- 型劈开式皮带轮的旋压剖分成形过程涉及多体运动以及弹、塑性多变形模式的耦合。
来自互联网
- 27. Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
- 锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
来自互联网
- 28. It has the advantages of Iow computing cost and simple input data when using this method to study the tube plastic deformation.
- 本方法研究轧管变形，具有计算费用低，输入数据简单的特点。
来自互联网
- 29. And with the increase of the plastic deformation, the inclined direction of the deformation bands takes place a symmetry change.
- 实验还观察到随着塑性变形量的增加，变形带的倾斜方向会发生对称迁移现象。
来自互联网
- 30. And with the increase of the plastic deformation, the inclined direction of the deformation bands takes place a symmetry change.
- 实验还观察到随着塑性变形量的增加，变形带的倾斜方向会发生对称迁移现象。
来自互联网
