- 1. What's wrong with the piping system?
- 管路出了什么问题？
来自互联网
- 2. Flushing of piping system for steering gear.
- 舵机管路系统的投油清洗。
来自互联网
- 3. Piping system design according to flow diagram.
- 按照流程图进行管道系统设计。
来自互联网
- 4. It is complex optimum problem to design the nuclear piping system.
- 系统的设计是个复杂的优化问题。
来自互联网
- 5. What kind of piping system should the Bourdon effect be considered to?
- 哪种类型的管系中应考虑到波登效应?。
来自互联网
- 6. The drawing examples of ship machinery piping system are also attached.
- 最后附了一些动力系统原理图的绘图实例。
来自互联网
- 7. The piping system should be blown with the compressed air after being welded.
- 管路体系焊补后应当用紧缩空气吹净。
来自互联网
- 8. So by considering the weight of a valve one can also reduce piping system costs.
- 所以，考虑到阀门的重量，就能够节约整个管道系统的成本。
来自互联网
- 9. Mooring test(sea trial) of M. E. and inspection attached pumps and piping system.
- 主机系泊（航行）试验并检查其附属泵与管路。
来自互联网
- 10. Chlorinated polyvinyl chloride (CPVC) piping system is ideal for process industry.
- 氯化聚氯乙烯是加工行业管道系统的理想选择。
来自互联网
- 11. Valve and strainers must be supported with conventional piping system support devices.
- 阀门和过滤器必须采用常规的管道系统支撑装置加以支撑。
来自互联网
- 12. Connect piping system to water mains, supply tanks, pumps, compressors and control equipment.
- 把管道系统与水管，供应罐，泵，压缩机和控制设备相连接。
来自互联网
- 13. It must be installed in a piping system, where the normal pressure does not exceed this rating.
- 它必须安装在公称压力不超过这个额定压力的管道系统中。
来自互联网
- 14. Bolted flanged connections are the most commonly used in petrochemical equipment and piping system.
- 螺栓法兰连接是石油化工设备和管道中应用最为广泛的密封形式。
来自互联网
- 15. Weld, braze, cement, solder and thread joints to join pipes and fabricate sections of piping system.
- 焊接，钎焊，用水泥涂抹，焊锡和螺纹接头，使其连接至管道，从而制造管道系统截面。
来自互联网
- 16. The pressure of sweeping shall not exceed the design pressure of the container or the piping system.
- 吹扫压力不得超过容器和管道系统的设计压力容器和管道系统的设计压力。
来自互联网
- 17. In-line devices include all items necessary to complete the process piping system for pressure testing.
- 管线内装置包括通过工艺管道系统压力测试所需的所有项目。
来自互联网
- 18. Once the piping system passes the pressure test, sweeping shall be carried out prior to the gas leakage test.
- 管道系统压力试验之后，气体泄漏性试验之前，应进行系统吹扫。
来自互联网
- 19. Electro-fusion is widely used in joint of polyethylene pipe, of which quality is very important to piping system.
- 聚乙烯管连接中大量使用电熔接头，其质量的好坏直接影响管道系统的安全。
来自互联网
- 20. One of the effective solutions to suppress the noise radiation is to install a silencer in the water piping system.
- 在水管路系统中，安装水消声器是降低管路系统辐射噪声有效方法之一。
来自互联网
- 21. The application of the UG codes to the aeroengine piping system design is discussed and the properties is described.
- 论述了UG软件在航空发动机外部管路设计中的应用过程及优势。
来自互联网
- 22. The pressure test of process piping system on a platform is a necessary important procedure during platform construction.
- 海洋平台工艺管线系统的压力试验，是平台建造中配管专业必不可少的一道重要工序。
来自互联网
- 23. Modularization construction applies during the AP1000 construction, which is the challenge to the piping system installation.
- 模块化施工在AP1000建设过程中的应用，给管道安装工作带来很大挑战。
来自互联网
- 24. It features an in-line maintenance design that offers serviceability of all operating parts without disturbing the piping system.
- 联线维修设计，在不影响管系统工作的情况下，就可对所有操作部件进行检修。
来自互联网
- 25. The company was established in 1997, is the groove in the earlier mechanical piping system of professional products manufacturers.
- 本公司成立于1997年，是国内较早的从事沟槽机械配管系统产品生产的专业厂家。
来自互联网
- 26. Vacuum solenoid valve, is used for vacuum piping system, or vacuum equipment, electromagnetic valve is used to control the vacuum.
- 是指用于真空负压管道系统，或者真空设备上，用来控制真空的开关的电磁阀。
来自互联网
- 27. When the research results herein are used in stress analysis of piping system in engineering, more precise results can be obtained.
- 本研究结果应用于工程设计中的管系应力分析，可使计算结果更为精确。
来自互联网
- 28. For alloy steel piping system, the liquid temperature shall be higher than the brittle transition temperature of the metal material.
- 如果是合金钢管道系统，液体温度应高于金属材料的脆性转变温度。
来自互联网
- 29. Freezing Weather Precaution - Subsequent to testing a piping system, valves should be in an open position to allow complete drainage.
- 结冰气候预防-检测管线系统后，阀门应该处于开启状态，做到排泄完全充分。
来自互联网
- 30. Freezing Weather Precaution - Subsequent to testing a piping system, valves should be in an open position to allow complete drainage.
- 结冰气候预防-检测管线系统后，阀门应该处于开启状态，做到排泄完全充分。
来自互联网
