9. Pipingdesign is needed in many industrial areas including petrochemical, chemical, light, pharmaceutical, nuclear, power and civil industry.
工厂管道设计遍布于石油、化工、轻工、医药、纺织、核工业、建筑、市政建设等众多行业。
来自互联网
10. But during designing, equipments selection and pipingdesign should be combined with the site conditions to get satisfactory applicable effects.
但在设计中，仍应注意结合实际情况进行设备选型和管路设计，力求获得较满意的使用效果。
来自互联网
11. Examples are cited to analyze the loss of heat duty for rigid pipe supports, providing an approach for pipingdesign to avoid heat duty loss at limit supports.
列举实际例子分析了刚性管架热失载问题，提供了一种在配管设计中避免限位支架热失载的手段。
来自互联网
12. Then, the intensity limitations for the displacement stress and secondary stress used in the pipingdesign codes and the pressure vessel design codes were discussed.
然后，对管道设计规范和容器设计规范中针对位移应力和二次应力的强度条件进行了讨论。
来自互联网
13. Organizations other than ASTM issue standards that are commonly encountered in industrial thermoplastic pipingdesign. The most important of these are described below.
14. Taking design of sewage and mud disposal engineering for example, application experience and process of EYECAD three-dimensional pipingdesign software were introduced.
以污水污泥处理工程设计为例，介绍了EYECAD三维配管软件应用经验和过程。
来自互联网
15. Flush function: the flush function of the sits implement directly depends on the pipingdesign, and it also has a relationship with the height of the water in water tank.
冲水功能：座便器的冲水好坏直接取决于管道设计，同时和水箱水位的高度及水件也有一的关系。
来自互联网
16. The author describes the points to be taken into consideration in pipingdesign for relief valve and their practices in order to operate under the set pressure and discharge capacity.
介绍安全阀配管设计中应考虑的问题及具体做法，使安全阀在要求的设定压力和排量下工作。
来自互联网
17. Project and system situation in Zouxian Power Plant were introduced, and the pipingdesign parameters and the piping material of main steam system and main feed water system were determined.
18. According to engineering design and practical experience, the author presents the unique characteristics, optimized layout and excellent pipingdesign of TEAL metering unit in polypropylene plant.
19. Piping system design according to flow diagram.
按照流程图进行管道系统设计。
来自互联网
20. Guidance on the classification and design of plastics piping systems used for renovation.
翻新用塑料管道系统的分类和设计指南。
来自互联网
21. The design characteristic and notice were probed into in piping of the hydrogenation reactor of diesel hydrotreating plant, in order to decrease design mistakes and increase design quality.
22. The design of the process piping is performed directly on a model of the project.
工艺配管的设计是直接按照工程项目的一个模型完成的。
来自互联网
23. Design philosophy and method of local instrument for piping is provided according to the practical example in order to provide reference for colleagues and improve the design level of piping.
24. Introduces the positioning, scope, contents, work procedure and work method of piping safety design.
介绍管道安全设计的定位、范围、内容、工作程序和方法。
来自互联网
25. The modular design and manufacture for piping have a remarkable effect on improving the quality and efficiency of piping and have a impetus on improving the quality of the whole machine.
配管的模块化设计及制造对提高配管的质量及效率效果明显，对设备整体质量的提高具有推动作用。
来自互联网
26. Piping vibrations in reciprocating compressors should not be underestimated in design, installation and application.
往复式压缩机管系振动是管系在设计、安装以及使用过程中不可轻视的问题。
来自互联网
27. Provide oil back design of refrigeration piping under various conditions of evaporator and compressor in freon refrigeration system.
介绍了氟里昂制冷系统中，在压缩机和蒸发器的各种使用情况下，制冷管道的回油设计。
来自互联网
28. The allowable stress of the pipe material shall be chosen from the data of GB 50316 Design Specification for Industrial Metal Piping.
管子材料的许用应力可按GB 50316《工业金属管道设计规范》中的数据选用。
来自互联网
29. The allowable stress of the pipe material shall be chosen from the data of GB 50316 Design Specification for Industrial Metal Piping.
