5. Execute test plan seriously according to the operation instructions from FirmwareDesign Engineer, and carefully record all data with right format.
严格的按照软件工程师拟定的操作指导书执行测试计划，认真和规范的记录实验数据。
来自互联网
6. The system is composed of hardware design of chip microprocessor, firmwaredesign of chip microprocessor, device driver and application software design.
系统设计包括硬件设计、单片机固件设计以及设备驱动程序和用户应用程序设计。
来自互联网
7. MCU firmwaredesign focuses on the structure and the realization of firmware, HID class devices developing, report descriptors establishment and ADS7843 sampling program design.
8. Studying firmwaredesign method by USB2.0 CMOS chip working in collaboration with FPGA cooperation and per work model characteristic, Realizing reasonable firmware designing and working model.
9. This paper introduced the system's hardware schematics and the humiture data acquisition methods, and a more detailed analysis of wireless communication protocol and USB firmwaredesign method.
对系统的硬件原理及温湿度采集方法进行了介绍，对无线通信协议及usb固件设计方法进行了较详细分析。
来自互联网
10. As well as meeting the original design objectives, it has proven itself a great platform for many forms of firmware.
除了达成最初的设计目标，它同样可以作为其它各种形式的固件的很好的平台。
来自互联网
11. This part in this multipart series covers hardware configuration, including understanding architecture, planning logical network design, setting up terminal servers, and updating firmware.
12. Firmware program design mainly shows the step of development and flowchart with corresponding code segment.
固件程序设计主要说明开发的步骤和流程图，并辅以相应的代码段。
来自互联网
13. This paper introduces the design of the hardware and the firmware of a boot card based on PCI bus.
本文介绍了一种基于PCI总线启动卡的硬件组成和固件的设计方法。
来自互联网
14. The design of software includes firmware, equipment configuration, BULK ONLY protocol and FAT file system.
其软件包括固件、设备配置、BULK_ONLY、FAT文件系统等程序的设计。
来自互联网
15. A design scheme of radar interface based on USB technology is presented. Techniques of hardware circuit design, firmware programming and application software design are illustrated.
16. Then, emphasize the development and design of USB device, among them include primarily; The design of USB hardware, the development of the firmware, the development of USB device driver.
17. The design of the software includes three parts as following: the network communication between PC and controller, NAT9914 firmware and DLL (dynamic link library) program.
18. The design of architecture of firmware, GUI, data structure, communication protocol, and program of the instrument of line patrol are presented in the thesis.
对嵌入式巡线仪中固件体系结构、GUI、数据结构、通信协议、程序进行了设计与实现。
来自互联网
19. And it introduces the theory of the design, selects specific chip, introduces the hardware of the channel, and brings forward the method of designing USB firmware, driver, and application.
20. The design of Lower Computer includes the hardware circuit and microcontroller firmware programming.
下位机平台的设计主要包括硬件电路的设计和单片机的固件编程。
来自互联网
21. Finally, we analyse and design the software of digital motion control systems based on USB, including the firmware of USB device, the drivers of USB device.
22. There were analog multiplexers, A/D conversion(analog digital conversion), FIFO module, CPLD module in the hardware design and CPLD program, USB firmware, USB driver in the software design.
23. In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计，并介绍了USB固件编程的实现。
来自互联网
24. Electrical connection, data processing, firmware program design are also explained in detail. And design of USB drive and application in PC are simply illustrated.
25. 0 data transmission module, the hardware design, the design process of firmware and client application programme has been put forward.
0数据传输模块，阐述了系统的硬件设计、固件程序和计算机端的应用程序设计过程和设计方法。
来自互联网
26. Two means of hardware interface is introduced in detail. 3 The software design of the communication board includes the firmware, the driver and the communication application program.
27. The hardware design using AT89S51 micro-controller and PDIUSBD12 and TLC2543 chips to achieve USB data transfer is carried out. And the firmware program design is introduced in detail too.
28. The firmware of repeater is designed in modular design method. The key technology of CAN module initialization and dual FIFO transforming are discussed in detail.
介绍了中继器固件的模块化设计方法，以及CAN模块初始化、双fifo转发等软件模块的具体实现。
来自互联网
29. Offered candidate will research and design sensor embedded firmware and test software.
候选者将负责研发传感器的嵌入式固件和测试软件的编写。
来自互联网
30. Offered candidate will research and design sensor embedded firmware and test software.
