- 1. Separate the end cap from the bumper.
- 将末端端盖和保险杆分隔开。
来自互联网
- 2. This property specifies the size of the top end cap.
- 这个属性定义了顶部的间隔大小。
来自互联网
- 3. This property specifies the size of the left end cap.
- 这个属性指定了左边顶端的大小。
来自互联网
- 4. The end cap will be used as the bearing or swivel point.
- 端盖将被用来作为轴承或旋转点。
来自互联网
- 5. Install the bolts attaching the end cap to the front fender.
- 拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
来自互联网
- 6. Install the bolts attaching the end cap to the front fender.
- 安装连接末端端盖到前挡泥板的螺栓。
来自互联网
- 7. Install the bolts attaching the end cap to the front fender.
- 拆去连接末端端盖前面到部分板下侧的螺丝。
来自互联网
- 8. Note the end cap is recommended in the femoral procedure only.
- 其他手术不推荐使用封帽。
来自互联网
- 9. End Cap: Belt Tensioning System, easy access, easy adjustment.
- 完第：皮带张紧系统，方便，调整方便。
来自互联网
- 10. I made a simple brass servo mount that's bolted to the end cap.
- 我提出一个简单的黄铜伺服山认为的螺栓到去年底的上限。
来自互联网
- 11. An end cap (64) is disposed at a closed end (66) of the coil system (38).
- 端盖(64)被放置在线圈系统(38)的闭合末端66。
来自互联网
- 12. End Cap - This is used in doorways that meet carpet, ceramic or stone tiles.
- 完帽，这是用来在门口迎接地毯、石材或陶瓷地砖。
来自互联网
- 13. It was then placed in a PVC end cap and short pipe, filled with water and frozen.
- 它其后被放置在一个聚氯乙烯完帽和短管，灌满水和冻结。
来自互联网
- 14. The end of the cylinder is closed by an end cap which is secured to the cylinder.
- 圆筒体的一端用一个固定在筒体上的端盖封闭。
来自互联网
- 15. Position the end cap on the rear of the retainer and the outer edge of the bumper.
- 拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
来自互联网
- 16. Position the end cap on the rear of the retainer and the outer edge of the bumper.
- 在扣件尾部和保险杆边缘外部定位末端端盖。
来自互联网
- 17. Carefully check the amount of water seepage from the end cap and end bell weep hole.
- 仔细地检查漏水孔端盖与端座水的渗出量。
来自互联网
- 18. The split type end caps are integrally formed by end cap connecting bolts in connection.
- 所述端盖为剖分式，通过端盖连接螺栓连接为一体。
来自互联网
- 19. Remove the screw attaching the front of the end cap to the underside of the quarter panel.
- 拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
来自互联网
- 20. I think I would even make a modified assembly that would replace the ballast tank end cap.
- 我想，即使作出修改的大会，将取代压载水舱端盖。
来自互联网
- 21. Install the screw attaching the front of the end cap to the underside of the quarter panel.
- 拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
来自互联网
- 22. Pull back the wheelhouse liner and remove the bolts attaching the end cap to the front fender.
- 拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
来自互联网
- 23. Pull back the wheelhouse liner and remove the bolts attaching the end cap to the front fender.
- 拆去连接末端端盖前面到部分板下侧的螺丝。
来自互联网
- 24. That in turn went in another layer of end cap and pipe with the gap filled with water and frozen.
- 这反过来去，在另一层端盖和管道输送的石油与差距灌满水和冻结。
来自互联网
- 25. Our square end cap design provides flexibility for either flush-face or horizontal (side) mounting.
- 我们的广场端盖设计，提供了可以冲洗面对面或横向(侧面)安装的灵活性。
来自互联网
- 26. The end (2) of the first body (8) and the end (16) of the second body (9) are fused to a first end cap (6).
- 第一主体(8)的端部(2)和第二主体(9)的端部(16)被熔接到第一端盖(6)。
来自互联网
- 27. When cleaning, keep motor, end cap and batteries away from liquids to prevent corrosion of electronic parts.
- 清洁时，确保电机、端盖和电池未沾水，防止电子部件腐蚀。
来自互联网
- 28. The end (17) of the third body (10) and the end (18) of the first body (8) are fused to a second end cap (11).
- 第三主体(10)的端部(17)和第一主体(8)的端部(18)被熔接到第二端盖(11)。
来自互联网
- 29. The first 6 plastic parts mold test, there are three more; barrel, cap and end cap should be ready by these few days.
- 兄弟们，先看看我们已试模的六个零件吧，还有三个；笔管，笔盖，尾盖，这几天应该能试出。
来自互联网
- 30. A first end cap is located adjacent the first end of the tube, wherein the first end cap comprises at least one air hole.
- 第一端盖位于套管的第一端附近，其中第一端盖包括至少一个气孔。
来自互联网
