15. A seismic design procedure for energy dissipation systems is proposed by using the capacity spectrum method in combination with Chinese seismic design code.
结合我国抗震设计规范，提出被动耗能减震结构基于能力谱法的抗震设计方法。
来自互联网
16. Using the improved inverse aerodynamic designcode, TAU code and interface codes, the transonic multi-lifting aerodynamic design software system is founded.
由此气动设计程羊、TAU程序以及相应的接口程序建立了跨音速多升力面气动反设计软件系统。
来自互联网
17. In the paper, specification and basis of sandy soils Liquefaction in the revised seismic DesignCode for Industrial and Civil Buildings are mainly described.
本文主要介绍《建筑抗震设计规范》送审稿中关于砂土液化问题修订的规定及依据。
来自互联网
18. This paper analyses the method of site classification in current "Seismic designcode for buildings" (GBJ11-89), and points out some deficiencies of this method.
本文分析了现行“建筑抗震设计规范”(GBJ11—89)中的场地分类方法并指出其中的不足。
来自互联网
19. In our national DesignCode of Reinforced Concrete Structures TJ10-74, there are no recommended methods for computing stiffness and crack of eccentrically loaded members.
我国钢筋混凝土结构设计规范(TJ10—74)中未列出偏心受压构件刚度和裂缝的计算方法。
来自互联网
20. Combines current national designcode (specification) and abroad research achievements, propose the elastic design methods and Suggestions of the staggered truss steel frame.
并结合现行国家设计规范(程)和国外研究成果，提出了钢结构错列桁架体系的弹性设计方法和建议。
来自互联网
21. Based on transformed section method, shear lag effect of continuous box girder was analyzed adopting variational principle, and compared with design code and experimental result.
22. The calculating equation for bearing strength of reinforced concrete, which is educed by the Theory of Hooping Strengthening, has been adopted in DesignCode of concrete Structure.
“套箍强化理论”导出的钢筋混凝土承压强度计算公式，被我国各行业混凝土结构设计规范普遍采用。
来自互联网
23. Based on the designcode of concrete structure (GBJ10-89), the paper gives the nominal tensile stress method of controlling crack width in prestressed concrete structure of punchy bars.
24. In our national DesignCode of Reinforced Concrete Structures, the stiffness formulas of Reinforced Concrete Flexural members were based on half theoretical analysis and half test result.
我国钢筋混凝土结构设计规范中，钢筋混凝土受弯构件的刚度公式是在半理论半实验的基础上建立起来的。
来自互联网
25. This paper analyses and discusses some problems in the building seismic designcode on design of the structure related to RC wall to major earthquake, and some suggestions are put forward.
26. Meanwhile, the forced mode uncoupling method widely used in seismic designcode also has good approximation, even though the relatively simple example structure is strongly non-proportional.
实例分析还表明，对于一般的强非比例阻尼结构，抗震设计规范中采用的强迫解耦方法也具有较好的精度。
来自互联网
27. Another solution is to designcode that avoids side effects in reference types wherever possible unless those changes are part of the contract that the called code is fulfilling for the caller.
28. The communication of available functionality was critical since there were only three weeks per iteration to perform system test application design, code, and unit test.
29. The pattern service and pattern framework provide the basic functions to structure, design, code, search for, organize, and apply patterns.
模式服务和模式框架提供构建、设计、编码、搜索、组织，及应用模式的基本功能。
来自互联网
30. After all the design, code generation or recompiling, and performance tuning, the next critical step to deploying a complex application is that a benchmark phase occur.
