- 1. Other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft stopping playing, or cam bearings and lifters.
- 其他可能的原因包括油泵问题、杆和主轴承的空隙、凸轮轴停止工作、或者凸轮的方位和升降。
来自互联网
- 2. Install cover for camshaft housing.
- 安装凸轮轴室盖。
来自互联网
- 3. The camshaft has a cam, on which there is a lob, or bump.
- 凸轮轴上有一个凸轮，凸轮上有一个凸角。
来自互联网
- 4. In its initial stage the change-of the camshaft is performed.
- 在他的初始阶段凸轮轴的转换被执行。
来自互联网
- 5. Camshaft is one of the important parts on the automobile engine.
- 凸轮轴是汽车发动机的重要零件。
来自互联网
- 6. The eccentric may be part of the camshaft itself or may bolt to it.
- 偏心轮可能与凸轮轴是一体的，也可能是通过螺钉连接的。
来自互联网
- 7. Since 1958, an engine with a single overhead camshaft has been used.
- 从1958年起，便已使用带有单顶置凸轮机的发动机。
来自互联网
- 8. The isothermal quenching process of the ductile iron camshaft was analyzed.
- 对球铁凸轮轴的等温淬火工艺进行了分析。
来自互联网
- 9. Camshaft from the crankshaft through the timing belt or gear or chain drive.
- 凸轮轴由曲轴通过齿形带或齿轮或链条驱动。
来自互联网
- 10. The value-opening mechanism includes a valve lifter and a CAM on a camshaft.
- 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
来自互联网
- 11. The value-opening mechanism includes a valve lifter and a cam on a camshaft .
- 一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
来自互联网
- 12. The camshaft also fits inside the block, except on overhead-cam engines (OHC).
- 除了顶置凸轮（OHC）发动机以外，凸轮轴都安装在气缸体里面。
来自互联网
- 13. Therefore, the camshaft must revolve at exactly half the speed of the crankshaft.
- 因此，凸轮轴必须以曲轴正好一半的速度旋转。
来自互联网
- 14. It's connecting methods are the key technology in assembling camshaft production.
- 而其连接方法是装配式凸轮轴制造的关键技术。
来自互联网
- 15. Remove the camshaft retaining bolt and remove the sprockets and chain as an assembly.
- 拆去凸轮轴固定螺栓，并拆去作为一个总成的链轮和链条。
来自互联网
- 16. Since the engine has no valves, it doesn't need any camshaft, valve lifters and so on.
- 因为发动机没有阀门，它不需要任何凸轮轴、起阀器等。
来自互联网
- 17. Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.
- 气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。
来自互联网
- 18. When you increase the RPM, however, this configuration for the camshaft does not work well.
- 当您增加转速时，但这种配置的凸轮轴不工作。
来自互联网
- 19. The key technology of hollow assembled camshaft is joint between the shaft and the cam lobes.
- 中空装配式凸轮轴的技术关键为凸轮和轴体之间的连接。
来自互联网
- 20. The mechanical fuel pump is used on many vehicles with carburetors and driven by the camshaft.
- 机械驱动燃油泵用于许多化油器式车辆，它由凸轮轴驱动。
来自互联网
- 21. Applied to ductile iron crankshaft, camshaft and other parts of the grinding and other grinding.
- 适用于球墨铸铁曲轴，凸轮轴等工件的磨削及其它磨削。
来自互联网
- 22. The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
- 那金属轴叫凸轮轴，翣在发动机里的每个气门一般有各自的凸轮。
来自互联网
- 23. The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
- 那金属轴叫凸轮轴，在发动机里的每个气门一般有各自的凸轮。
来自互联网
- 24. One centrally located camshaft per cylinder bank is driven by a fiberglass-reinforced toothed belt.
- 一个位于中央的每缸银行是由凸轮轴驱动的玻璃纤维增强型齿形带。
来自互联网
- 25. Using the so-called hall effect the hall sensors determine the position of the respective camshaft.
- 利用所谓的霍尔效应，霍尔效应传感器可确定各凸轮轴的位置。
来自互联网
- 26. The timing is controlled by the camshaft which is synchronized to the crankshaft by a chain or belt.
- 凸轮轴通过皮带链接与机轴保持同步，准确控制了可燃气体的进出时间。
来自互联网
- 27. The front of the cylinder head is also equipped with oil galleries to supply the intake camshaft VVT.
- 气缸头的前部还装有油画廊供应量凸轮轴可变配气相位。
来自互联网
- 28. In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
- 在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
来自互联网
- 29. A system of automated NC camshaft grinding machine with moderate price and high capability was developed.
- 为此，开发了一套价格适中的高性能数控凸轮磨床控制系统。
来自互联网
- 30. A system of automated NC camshaft grinding machine with moderate price and high capability was developed.
- 为此，开发了一套价格适中的高性能数控凸轮磨床控制系统。
来自互联网
