- 1. Cutting edges must be free from burrs.
- 刃口不能有毛刺。
来自互联网
- 2. Removing scratches or burrs for welding side of hairline.
- 拉丝表面焊接后的去划痕及毛刺。
来自互联网
- 3. It's like a weed with burrs And stickers that prick people.
- 就好像一根带刺的杂草刺伤人。
来自互联网
- 4. This business card printing up text there would be no burrs.
- 这样制卡上去的文字就不会有毛刺。
来自互联网
- 5. Parts to be clean ad free of MFG oll, burrs, and sharp edges.
- 工件应该保持清洁，没有MFG油，毛刺，锐边。
来自互联网
- 6. The centers must be aligned and the mandrel must be free of burrs.
- 这些中心点必须排列成一行，并且保证心轴上没有毛刺的现象出现。
来自互联网
- 7. Use the reaming blade on the end of the tube cutter to remove any burrs.
- 用截管器尾部的铰刀清除毛边。
来自互联网
- 8. I made sure that all the burrs were cleaned up so I didn't damage the plug.
- 我相信所有的毛刺被清理，所以我并没有损害堵塞。
来自互联网
- 9. Also check that the adjoining pipework is clean and free from debris and burrs.
- 也检查所连接的管道是否清洁，没有碎片和毛刺。
来自互联网
- 10. It can remove burrs and fine powder on the tablet, with no static electricity generated.
- 可去片剂的毛边及细粉，且不产生静电。
来自互联网
- 11. Each straight pin is cut, chamfered, and polished to remove burrs and enhance performance.
- 每个圆柱销都需要切割，刻槽，剖光，去刺和增强性能。
来自互联网
- 12. There are usually burrs in the fracture of thin sheet parts stamped with steel blanking die.
- 用常规钢制冲模冲裁薄片零件，断口常有毛刺。
来自互联网
- 13. If the tank is made of sheet steel, clean it thoroughly to remove all dirt, chips, and burrs.
- 如果油箱材料是钢板，干净彻底清除所有污垢，碎削和毛刺。
来自互联网
- 14. Remove all slivers and burrs left cutting the tube, by reaming and filing, both inside and outside.
- 通过内外铰锉，将遗留在管道切割口的长条和毛刺清除掉。
来自互联网
- 15. This paper investigates the occurence of plastic now layer and formative mechanism of metal cutting burrs.
- 讨论了在切削加工中塑流层的形成及切削毛刺的生成机理，在采用直角自由刨削加工方式中。
来自互联网
- 16. One prisoner brought out his small, blunt-tipped scissors, and trimmed burrs and matted fur from his coat.
- 一名犯人拿出他的钝头小剪刀，给它修剪身上的芒刺和纠缠的毛团。
来自互联网
- 17. Burrs, slivers, scabs and weld spatter visible following blasting shall be removed and the area re-blasted.
- 喷砂之后，应当除掉明显的毛刺、裂片、瑕疵和焊渣并对此处再次喷砂。
来自互联网
- 18. Surface imperfections, such as slivers, scabs, burrs, weld splatter, and gouges, shall be removed by grinding.
- 表面瑕疵，例如碎片，烧痕，焊渣，砂眼应用磨光机打磨。
来自互联网
- 19. Turbulence - burrs left on the cut tubing causes a tumbling effect causing localized erosion and eventual failure.
- 湍流-切割管道时留下的毛刺使流体产生旋转作用，导致局部侵蚀，从而最终造成故障。
来自互联网
- 20. To facilitate customer manipulation, strips of stainless steel are rolled to smooth the edges and remove any burrs.
- 为了方便客户的操作，轧制不锈钢带以使表面光滑，去除毛边。
来自互联网
- 21. The theoretic and experimental basis to restrain or decrease the feed-direction burrs in turning are made in this study.
- 该研究为有效地控制车削加工毛刺的形成与变化，确保加工质量提供了理论与实验依据。
来自互联网
- 22. The case of burrs defective in cyanide tin - copper alloy deposits were investigated and preventive methods were proposed.
- 分析了氰化镀铜锡合金过程中镀层出现毛刺弊病的原因，并提出了解决方法。
来自互联网
- 23. Unless general requirements, inspector shall also note out-of-size or burrs problem caused by material lost after anodizing.
- 除一般要求外，应该注意是否因氧化而引起的材料的损失而造成的尺寸不良，挂孔披锋等现象。
来自互联网
- 24. Silicon carbide tumbling abrasives have sharp edges ideal for use in tumbling barrels for 'sanding' edges and softening burrs.
- 碳化硅磨料锋利的表面适合用于铸件，铸铁，铜，铝，石料，皮革和橡胶的表面及打磨。
来自互联网
- 25. Based on the features of burrs generated on different areas of the thread, the corresponding deburring technologies are discussed.
- 根据油井管螺纹不同部位产生毛刺的特点，讨论了去除和控制毛刺的相应工艺方法。
来自互联网
- 26. We also went nutting, and I helped them open the chestnut burrs and break the shells of hickory nuts and walnuts-the big, sweet walnuts!
- 我们有时还去采野果，我帮她们剥栗子皮儿，帮她们砸山核桃和胡桃的硬壳，那胡桃仁真是又大又甜！
来自互联网
- 27. And the application results of the new classification system of the burrs in turning, drilling and grinding show many good characteristics.
- 将该分类体系应用于车削、钻削和磨削加工，表明切削运动-刀具切削刃毛刺分类体系定义明确、完整。
来自互联网
- 28. This paper has approached to the cause for grinding"sense of ad-hesion"and formation of burrs of ram mate part of oil pump in cold working.
- 前言：本文探讨了油泵柱塞在冷加工中的磨削粘感和毛刺成因问题。
来自互联网
- 29. Metal parts: Free of rust, splinters, cracks, running paints, scratch, and burrs, or other obvious defects. Edges and corners shall be rounded.
- 金属部分：无锈，刺，裂痕，脱漆，划痕，毛边，其他明显的缺陷。
来自互联网
- 30. Metal parts: Free of rust, splinters, cracks, running paints, scratch, and burrs, or other obvious defects. Edges and corners shall be rounded.
- 金属部分：无锈，刺，裂痕，脱漆，划痕，毛边，其他明显的缺陷。
来自互联网
