The main reason that gives rise to manufacturing error of contouring turn plate CAM former face is derivation of cutter.
来自互联网
15. 根据车刀磨损与工件表面纹理内在关系，研究和设计了显微监测系统。
According to the relationship between turning tools' wear and work-piece texture, a micro monitoring system is researched and designed.
来自互联网
16. 圆弧刃车刀加工时的“包络成形”原理使它被公认为有别于直线刃刀具。
Arc blade lathe tool is recognized that it's different from beeline bl ade because of its principle of "envelope forming".
来自互联网
17. 通过构建几何模型，推导出蜗杆车刀头部的计算公式，简化了计算程序。
Via the construction of geometric model, calculation formula for the head of worm lathe tool has been deduced, which has simplified calculation program.
来自互联网
18. 在设计不重磨车刀时，在许多情况下采用带刃倾角刀片可获得满意的效果。
In the design of throw-away type clamped tip turning tool, in many cases, the use of insert with an inclination Angle results in a satisfactory effect.
来自互联网
19. 从不重磨车刀的使用寿命、加工表面粗糙度等方面，来展开试验分析研究。
From the wear resistance of non-regrind cutters and the roughness of processed surfaces, some tests and analysis are done.
来自互联网
20. 而采用单片机误差补偿系统可以对车刀的进给量进行补偿，提高加工精度。
But the error compensation system of single-chip microcomputer can be employed for the lathe to control the cutter movement, thus increasing the processing precision.
来自互联网
21. 论述了双T形转子轮槽加工中所用成形车刀的设计方法及制造时关键要点。
The design method of forming lathe tool for machining double T-shape rotor wheel groove was discussed in this paper and finally the keys for manufacturing are illuminated.
来自互联网
22. 试验结果表明：用自旋转车刀加工金属纤维是一种行之有效的切削加工方法。
Experimental results show that machining metal fibre by using self propelled turning tools is an effective way.
来自互联网
23. NET和UG设计软件为二次开发平台，开发了高精度圆体成形车刀设计系统。
NET and UG as the secondary development platform, a high precise CAD system for circular formed turning tools was developed.
来自互联网
24. 研究用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。
The effects of the machining depth and the amount of feed on the mechanical properties of the metal fiber to be machined with the self propelled rotary turning tool are researched.
来自互联网
25. 车削刀具可以是精车刀具或粗车刀具。粗车刀具刀尖半径较小，用 于深切削。
Turning tools. Turning tools can be either finishing or rough turning tools. Rough turning tools have small nose radii and are employed when deep cuts are made.
来自互联网
26. 研究了用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。
In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.
来自互联网
27. 介绍了模块式车刀在国产化过程中刀具结构的确定，刀片材质的选择及其实际应用。
This paper presents the process of modular turning using in our country, the design of cutter structure, the material selection of inserts and the practical application.
来自互联网
28. 介绍了模块式车刀在国产化过程中刀具结构的确定，刀片材质的选择及其实际应用。
This paper presents the process of modular turning using in our country, the design of cutter structure, the material selection of inserts and the practical application.
