If the flow drops to about 40 % of the rated flow, the HPRT stops producing power and a drag can be imposed on the main driver.
来自互联网
2. 如果不能使用起吊螺丝孔，应在入子上作撬模杆进入的斜槽。
If jack screws cannot be used than angled slots need to be installed for pry bar access.
来自互联网
3. 在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。
Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.
来自互联网
4. 本发明合模螺丝装在上模上不会松脱，合模方便，直接拧紧螺栓就可以合好模具，生产效率高。
The die clamping screw arranged on the upper die can not loose, the die clamping is convenient, the die can be clamped well by directly screwing the bolt, and the production efficiency is high.
来自互联网
5. 本发明合模螺丝装在上模上不会松脱，合模方便，直接拧紧螺栓就可以合好模具，生产效率高。
The die clamping screw arranged on the upper die can not loose, the die clamping is convenient, the die can be clamped well by directly screwing the bolt, and the production efficiency is high.
