An alternative technique could employ conventional lanes, which would be shared by automated and regular vehicles.
来自互联网
2. 对普通车而言这是很现实的。
With conventional cars, this is pretty much true.
来自互联网
3. 介绍了将普通车床改装为拉床的方法。
The method refitting the common lathe into broacher is introduced.
来自互联网
4. 操作普通车床和铣床及日常故障维修。
Operate universal lathe and milling machine, daily failure repair.
来自互联网
5. 普通车辆可轻易抵达停车场。
Normal car can reach trailhead easily.
来自互联网
6. W：要普通车还是快车。
W: Regular or express train?
来自互联网
7. 有时候你不想要一辆太像普通车的两栖车。
Sometimes you don't want an amphibious vehicle to look too much like a car.
来自互联网
8. 普通车床。可以指定尺寸和操作净空面积。
Centre lathe. Dimensions and operating clearance area can be specified.
来自互联网
9. 试验在普通车床上进行。
Experiments are performed on a general lathe.
来自互联网
10. 要普通车还是快车？
Regular or express train?
来自互联网
11. 要普通车还是快车？
Regular or express train ?
来自互联网
12. 利用现有普通车床，采用两种方案进行深孔加工。
Fabricating deep hole is carried out using common lathes and adopting two scheme.
来自互联网
13. 本文正是基于8088的普通车床数控改造设计。
This article is based on the 8088 transformation of the general design of CNC lathe.
来自互联网
14. 普通车床设卡盘扳手互锁安全装置针对此情况而设计。
Interlocked safety device of chuck wrench in plain lathe is designed to this situation.
来自互联网
15. 产品广泛应用于普通车床的数控改造以及其他的自动控制设备。
Products are widely used in the general transformation of CNC lathes and other automatic control equipment.
来自互联网
16. 分析对比绳索取心钻杆螺纹的普通车削、数控车削加工的方法。
Analyze and compare the general lathe work and the CNC lathe work for the cordage core rod's thread.
来自互联网
17. (算下来)普通车每英里12美分而Leaf车每英里2.6美分。
That's 12 cents per mile for the conventional car and only 2.6 cents per mile for the Leaf.
来自互联网
18. 在现代的生产车间中，普通车床已经被种类繁多的自动车床所取代。
The engine lathe has been replaced in today's production shops by a wide variety of lathes.
来自互联网
19. 进行了超声振动车削与普通车削、磨削加工陶瓷材料的对比试验研究。
Machining of ceramics processed by ultrasonic vibration-turning is experimentally compared with that through conventional turning and grinding.
来自互联网
20. 根据实验教学的经验，设计和制造了用于普通车床的电阻式测力装置。
Based on experimental teaching experience, the resistance force-measured device used in power lathe is designed.
来自互联网
21. 按普通车、车队、特殊车、冲卡车四种情况采取四种不同的控制逻辑。
The control logic includes common vehicle, motorcade, special vehicle and passing vehicle without permit.
来自互联网
22. 还有火星的科学研究室，一个普通车大小的采集车将探索那个红色星球。
And the Mars Science Laboratory, a car-sized rover that will explore the red planet.
来自互联网
23. 在下面这节中，要讨论的是能在传统普通车床上进行的各种机加工作业。
In the following section, we discuss the various machining operations that can be performed on a conventional engine lathe.
来自互联网
24. 目前对普通车床床身的设计缺乏有效的理论依据，床身的结构设计不尽合理。
Now lathe bed lacks effective design of rational basis; structural design bed is not enough reasonable.
来自互联网
25. 较详细地介绍了用普通车床改装成加工平面二包蜗轮副专用机床的设计方法。
This paper introduces the design method of redoing ordinary lathe to special machine tool for manufacture planar second-enveloping worm wheel in details.
来自互联网
26. 因此，一个普通车胎含有约1/5天然橡胶，而一个飞机轮胎中则超过4/5。
Around a fifth of an average car tyre is therefore made of natural rubber. In an aeroplane tyre that figure can be more than four-fifths.
来自互联网
27. 以CA6140普通车床为例，介绍了普通车床改造为经济型数控车床的设计方案。
Taking example for CA6140 engine lathe, the scheme of modifying the engine lathe into the economical numerically controlled lathe is introduced.
来自互联网
28. 通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点，从而提高接触刚度。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
来自互联网
29. 通过改进普通车床主轴箱与床身接触面的刮削方法增加接触点，从而提高接触刚度。
Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.
