The flow of rubber compound in the screw channel was analyzed with the basic equation of the viscous fluid kinetics.
youdao
2. 本文详细讨论了螺槽深度对计算结果的影响，计算表明，在浅螺槽时计算结果是良好的。
The influence of channel depth has been discussed, the results show that the method iss…
youdao
3. 利用滑环装置测量了喷油单螺杆压缩机转子螺槽的表面温度，给出了各种不同工况下表面温度的数据。
The surface temperatures of grooves of an oil-flooded single screw compressor are measured with a slide-ring, and the surface temperatures on different working conditions arc given.
youdao
4. 本系统能近似地模拟挤出过程，并预测挤出机的挤出产量、物料沿螺槽的充满长度、物料的停留时间等。
This system can approximately simulate the extrusion process and calculate the output of the extruder, brimming length along the axis of screw, materiel settling time etc.
Some new concepts are proposed, such as two phases column group of solid and melt of channels filled partially, the function of solid height which are different from t…
youdao
6. 在髓内钉杆近端设置有锁紧螺杆定位螺孔、连接套定位槽。
The locking screw positioning hole and a joint sleeve positioning slot are arranged on the proximal end of the intramedullary nail bar.
youdao
7. 如果螺尖丝锥或者螺旋槽丝锥不能被使用，推荐使用具有较大排屑槽的三槽丝锥。
If a gun tap or spiral fluted tap cannot be used, a three fluted tap which permits extra chip space, is recommended.
youdao
8. 该凸台是设置在该螺头与该螺杆之间，其外周缘设有若干纵槽。
The lug boss is arranged between the screw head and the screw rod, and the external circumference of the lug boss is provided with a plurality of longitudinal grooves.
youdao
9. 该凸台是设置在该螺头与该螺杆之间，其外周缘设有若干纵槽。
The lug boss is arranged between the screw head and the screw rod, and the external circumference of the lug boss is provided with a plurality of longitudinal grooves.
