To overcome some of the double rigid rapier loom was developed.
youdao
2. 最简单的剑杆织机是刚性单剑杆织机。
The simplest rapier loom is known as the single rigid rapier.
youdao
3. 我公司是国内最生产剑杆织机的厂家之一。
Our company is the most productive rapier one of the manufacturers.
youdao
4. 然而，最好是购买剑杆织机和GLX模型。
However, the best buys are the Rapier and GLX models.
youdao
5. 提出了一种新颖的剑杆织机电子引纬方法。
The article presents a new way for insertion motion on rapier machine.
youdao
6. 本厂拥有剑杆织机80台，月供货30万米。
The plant has Rapier 80, Availability on 30 meters.
youdao
7. 剑杆织机的种类很多。
Rapier looms are made in a variety of types.
youdao
8. 用特阔剑杆织机及特阔片梭机织造，纱支精细。
Use special broadly Rapier loom and very broadly gripper machine weaving, fine yarn.
youdao
9. 本论文讲述了剑杆织机嵌入式控制系统的设计和实现。
This paper is about the designing of Embedded control system of rapier loom.
youdao
10. 利用ANSYS软件建立了剑杆织机机架的有限元模型。
The FEM model of rapier loom frame is established with ANSYS software.
youdao
11. 本文介绍一种刚性剑杆织机CMOS电路控制装置的原理。
The principle of a new electronic control device with CMOS circuits on hard rapier loom is introduced.
youdao
12. 用于各种型号的剑杆织机在织机发生断纬时控制织机停车。
Used for various types of rapier looms for stopping operation in case of broken weft.
youdao
13. 提出了智能化剑杆织机的概念和智能化剑杆织机的解决方案。
The concept and settling scheme for intelligent rapier loom are put forward.
youdao
14. GAMMA型剑杆织机进行双纬织造时，机构设置有其特殊性。
During double weft weaving of GAMMA rapier loom, the mechanism has its speciality.
youdao
15. 利用数据拟合方法研究剑杆织机控制系统中的开车痕补偿问题。
The start mark compensation of the loom system is studied by means of digital synthesize for the first time in this paper.
youdao
16. 剑杆织机和片梭织机都是按每次引入一纬设计的，因此可以任意引纬。
Rapier and projectile looms, which by design insert single picks, are ideally suitedfor pick - and - pick capability.
youdao
17. 用弹性动力学和运动学方法对剑杆织机动态引纬运动进行了综合分析。
The synthetical analysis of weft motion in the rapier loom by elastic dynamics and kinematics methods is made in this paper.
youdao
18. 在织造工序，公司拥有最先进的比利时必佳乐伽马x剑杆织机250多台。
In the weaving process, the company has the most advanced Belgium gamma X rapier loom more than 250.
youdao
19. 阐述了高支赛络菲尔贡丝锦的组织结构设计和在不同剑杆织机上织制经验。
Form construction design of the fine sirofilspin doeskin and experience of weaving on the different rapier looms.
youdao
20. 文章简单分析了剑杆织机在织造生产中因断经、断纬故障停台的原因及解决方法。
The paper briefly analysed the reason of stoppage for the broken warp and broken filling on rapier loom in production process and put forward the solving method.
youdao
21. GA747型剑杆织机结构简单，使用广泛，但是采用单片机控制存在着诸多缺点。
GA747 Rapier Loom has the advantages in its simple structure and extensive application, while the disadvantage lies in its microcontroller.
youdao
22. 介绍了网络丝在剑杆织机上织造各工序工艺配制，并就如何提高产品质量进行了分析。
Describes the configuration of various processes in weaving the fabric with interlaced yarn by rapier looms, with discussions made on how to improve the product quality.
youdao
23. 介绍了CRT- 83型地毯剑杆织机的性能与特点，并对其地毯成形原理作了剖析。
This paper introduced the function and characteristics of the CRT-83carpet rapier loom, and analyzed the principle of the carpet shape.
youdao
24. 本文分析了剑杆织机椭圆齿轮——连杆引纬机构的运动规律，并对该机构进行了优化设计。
In this paper, the kinematic analyses and optimization design for elliptic gear-linkage rapier driving mechanism in rapier loom were made.
youdao
25. 单剑杆织机使用的剑杆必须是刚性的。在采用双剑杆时，剑杆可以是刚性的，也可以是挠性的。
The single rapier is invariably rigid, but, when two rapiers are used, they may be rigid or flexible.
youdao
26. 分析了G1731型剑杆织机引纬机构的原理及运动规律，探讨了剑杆织机引纬机构的调整方法。
This article analyses the movement principle and regulation of the weft insertion of rapier loom model G1731, and discusses its adjustment.
youdao
27. 为了克服潜在的占地问题，挠性双剑杆织机被研制出来，剑杆不再是刚性的棒，而是柔性的带子。
To overcome the potential space problem, the double flexible rapier was developed. The rapiers in this case are no longer rigid bars but flexible tapes.
youdao
28. 就剑杆织机剑头引起断头停台情况进行归纳分析，对如何加强剑头维护，提高织机效率进行探讨。
The broken ends stoppage caused by rapier gripper are induced and analysed and the ways of enhancing rapier gripper maintenance to improve loom efficiency are explored.
youdao
29. 主要介绍利用三菱p LC对高速剑杆织机控制时角度信号的采集以及断经断纬时定位停车的处理。
This paper introduces how to collect the Angle signal by using Sitsubish PLC for stop location control of high-speed rapier loom when warp or weft broke.
youdao
30. 主要介绍利用三菱p LC对高速剑杆织机控制时角度信号的采集以及断经断纬时定位停车的处理。
This paper introduces how to collect the Angle signal by using Sitsubish PLC for stop location control of high-speed rapier loom when warp or weft broke.
