Add with bolt outfit go up in shuttle carapace, for guide plate of a half moon.
youdao
2. 采用粉末冶金方法研制出金属陶瓷导板。
A Copper-Tungsten ceramel guide has been developed by the powder metallurgy.
youdao
3. 现场观察发现了钢板撞击精轧机组侧导板现象。
The collision of steel strip with flipper guide was observed on finish rolling unit.
youdao
4. 电机带动带动刀片的循环链围绕导板外周运转。
The electric motor drives the endless chain of the blade to work around the periphery of the guide board.
youdao
5. 为此，研制了一种机械夹固式高铬钼抗磨铸铁组合导板。
Therefore, a kind of mechanically fixed assemble guiding plate made of hi-Cr-Mo wear resistant cast iron was developed.
youdao
6. 给出亚微米光栅型光导板的初始结构，并进行了误差分析。
Finally, the initial structure of light guide plate with sub-micron gratings is given and the error is analyzed.
youdao
7. 在导板引导下进行无牙颌种植手术，植入ITI种植体。
Physical guide templates were then rapid-prototyped. ITI implants were implanted guided by the template.
youdao
8. 结论平面导板会造成下前牙牙根的吸收，但根吸收程度轻微。
Conclusion Flat bite plate can cause root resorption of mandibular permanent incisors, but the root resorption is slight.
youdao
9. 交互牵引结合固定平面导板是矫治下颌第一磨牙舌倾的有效方法。
Clinical application of intermaxillary traction and fixed flat bite-plate could correct lingual inclination of mandibular molar effectively.
youdao
10. 在导板优化基础上，对给定产品规格范围进行叶片宽度的优选设计。
Further, the optimum design for blade width is carried out within the given range of product size.
youdao
11. 摘要[摘要]目的了解计算机种植导板在斜向种植手术的应用情况。
Abstract: Objective To explore the application of computer-assisted implant guide in inclined implant surgery.
youdao
12. 在导板优化基础上，对给定产品规格范围进行叶片宽度的优选设计。
Further, the optimum design for blade width is carried out within the given range of product siz...
youdao
13. 目的：研究应用局部固定式斜面导板矫治颜面不对称畸形的临床效果。
Objective Research application partial stationary type incline guide plate corrects the face countenance asymmetrical abnormal clinical effect.
youdao
14. 对于精密零件之加工，如需于机体附加滑块导板，亦可接受指定制造。
For processing of some precise parts, if guide slide in machine body needed, it is also available.
youdao
15. 目的：研究应用局部固定式斜面导板矫治颜面不对称畸形的临床效果。
Objective To explore the effect of distraction osteogenesis (DO) in the treatment of juvenile mandibular deformity.
youdao
16. 本发明包括一个转筒和带动转筒旋转的驱动机构，转筒内 设有螺旋导板；
The mechanical device comprises a rotary drum and a driving mechanism for driving the rotary drum to rotate, wherein the rotary drum is internally provided with a spiral guide plate;
youdao
17. 避免钢板撞击精轧机组侧导板是消除结疤缺陷提高热轧板材质量关键因素之一。
Porosity cluster of cold rolled sheet is transformed from scars, and it is critical to avoid collision for improving the surface quality of hot rolled strip.
youdao
18. 避免钢板撞击精轧机组侧导板是消除结疤缺陷提高热轧板材质量关键因素之一。
The collision of steel strip with flipper guide on finish rolling unit is the reason…
youdao
19. 纵向调节机构的纵向导板与定位板之间的连接方式可采用压紧连接或柱销式连接。
The connection type between the vertical guide plate of the vertical adjusting mechanism and the positioning plate can adopt compression-fitting connection or dowel pin type connection.
youdao
20. 各床层间的通导板，在单层装配仅吊装入内，不固定便于现场检验人员现场作业。
The passage between the bed plate, only in lifting the assembly into the inner layer, to facilitate on-site inspection is not fixed-site operations.
youdao
21. 侧导板、夹送辊、卷筒的位置控制对整个卷取区至关重要，直接影响卷取成功与否。
The position control of side guider, pinch roll, and mandrel is very important for the whole coil area. It influences directly the success of coiling.
youdao
22. 并阐述了这种焊条在热剪剪刃、机导板头、墨无限冷硬铸铁轧辊堆焊等方面的应用情况。
Its application situation on heat shearing blade, guide plate and nodular indefinite chill roll are introduced too.
youdao
23. 分割面的倾斜角被设为使从光源投射的光以基本上平行于光导板的板面的方向反射的角度。
A slant Angle of the dividing surfaces is set to one at which the light projected from the light source is reflected in a direction substantially parallel with a plate of the light guide plate.
youdao
24. 导板是线材轧机上的关键备件，要求有优良的耐磨性、抗断裂性、抗粘钢性和热冲击抗力。
On wire - rod mill, the guide shoe is key spare parts to which, excellent wear - resistance, fracture - resistance, dead burning resistance and hot shock resistance are required.
youdao
25. 结果深覆颌总矫正率72.2%，昼夜戴用该改良上颌平面导板组的深覆颌矫正率100%。
Results The correction rate was 72.2% in total and 100% in therapy group.
youdao
26. 摘要目的评价自主研发CAD - CAM种植导板制作系统在无牙颌种植修复中的临床应用。
Abstract: Objective to evaluate the clinical application of a self-developed CAD-CAM implant guide template system used in implant restorations for edentulous patients.
youdao
27. 渗水板上设置 有网状小孔，疏导板上设置有纵向的排水凹槽和与排水凹槽相垂直的连通凹槽。
A net-shaped small hole is arranged on the seepage plate, and a longitudinal drainage groove and a groove which is vertically communicated with the drainage groove are arranged on the guided plate.
youdao
28. 一种彩色显示器件，具有一个单独的光波导板，和分别独立地展现三原色和第一、第二、和第三光源。
A color display device has a single light guiding plate, and first, second and third light sources that respectively independently exhibit three primary colors.
youdao
29. 一种彩色显示器件，具有一个单独的光波导板，和分别独立地展现三原色和第一、第二、和第三光源。
A color display device has a single light guiding plate, and first, second and third light sources that respectively independently exhibit three primary colors.
