Well, the answer is basically in our convention for curl.
youdao
2. 最后对旋转动能也作了估计。
Finally, the rotational kinetic energy is also estimated.
youdao
3. 对旋流反应器的传质系数进行了研究。
The mass transfer coefficient in cyclone reactor was studied.
youdao
4. 目的研究牙槽骨高度对旋转移动的影响。
Objective to study the effect of alveolar bone height to tooth rotation.
youdao
5. 提出了设计对旋式轴流通风机的基本设计思路。
The basic design thinking of counter-rotating axial fan is put forward in this paper.
youdao
6. 介绍了一种针对旋转物体的多点温度测量方案。
This paper presents a method to measure the multipoint temperature of a rotating object.
youdao
7. 工程师们对旋转表圈的运转顺畅性能进行综合检测。
Engineers systematically verify the smooth operation of the rotating bezel.
youdao
8. 还对旋风炉内强旋流场的气相燃烧情况进行了预报。
The modeling of gas phase combustion in the cyclone was also made.
youdao
9. 因此，对旋转机械开展故障诊断研究具有十分重要的意义。
Therefore, the research on rotating machinery fault diagnosis is of great significance.
youdao
10. 介绍了BDK对旋高效轴流式风机的优点及其实际应用情况。
This paper introduces the advantages and real applications of BDK disrotatory high-efficiency axial fan.
youdao
11. 论文第六章对旋进旋涡流量计的流体振动特性进行实验研究。
The sixth chapter made an experiment study upon the fluid oscillation characteristics of vortex precession flowmeter.
youdao
12. 介绍了矿用对旋轴流式主通风机的在线监测和故障诊断系统。
On-line monitoring and trouble diagnosis system of counter-rotating type of axial fan for mine is introduced.
youdao
13. 采用等动采样方法对旋风管内的颗粒浓度分布进行了系统测量。
The distribution of particle concentration in the cyclone tube was measured by isokinetic sampling method.
youdao
14. 残余应力的大小及其分布规律对旋压件的使用性能有重要的影响。
The magnitude and distribution of residual stresses have an important influence on used property of spun parts.
youdao
15. 利用模糊预测控制对旋转型行波超声电机的速度控制进行了研究。
Applying fuzzy predictive control to the speed of rotary traveling wave type of ultrasonic motor was researched.
youdao
16. 首先，它表现在对旋律因素的判断能力上，如旋律的调式调性如何？
First, it is in the judgment of melody factors, such as the melody mode how tonal?
youdao
17. 由流体径向温度梯度引起的离心浮力对旋流强化传热效果有重要影响。
Centrifugal buoyancy arising from radial temperature gradient of fluid has a great influence on the enhanced heat transfer performance of swirling flow.
youdao
18. 而在较大的流量范围内，进口流量对旋流器分离效果没有显著的影响。
In a large flow range, the inlet flow has no remarkable influence on the separation effect.
youdao
19. 针对青藏铁路客车轮缘异常磨耗导致的轮对旋修问题进行了经济性分析。
The economy analysis is made on the wheelset turning caused by abnormal wear of wheel flange of passenger cars on Qingzang Railway.
youdao
20. 测量结果说明介质和温度对旋风分离器分离细颗粒催化剂有一定的影响。
The measurement results denoted that: the medium and temperature produced a certain influence on fine grain catalyst separated from cyclone.
youdao
21. 此外，还通过主成分分析的方法分析了不同组成对旋转氧弹值的影响强弱。
Furthermore, we also studied the relative strength of different composition to oxidation stability by principal component analysis.
youdao
22. 本文就音乐欣赏课中对旋律、节奏、结构的审美能力的培养问题作一论述。
This article gives an exposition of its views as to the cultivation of aesthetic judgement in melody, rhythm and structure in a music appreciation class.
youdao
23. 毫无疑问，他是一位对旋律极有灵感的创作者，这是一种罕见而珍贵的天赋。
There is no doubt that he was an inspired creator of melody and that is a rare and precious gift.
youdao
24. 对旋流器压力场、速度场和分离介质运动迹线分布特征的数值模拟进行了研究。
The pressure field distribution, velocity field distribution and path lines of the separated medium flowing in hydrocyclone were numerically simulated.
youdao
25. 同时，针对旋流泵的性能曲线和汽蚀问题与同比转数普通离心泵进行了对比分析。
Comparing of performance curves and cavitation property with common centrifugal pump of same specific speed was presented in this paper.
youdao
26. 针对旋转机械故障诊断专家系统中的知识表示问题，讨论了语义网络的知识表示方法。
Aiming at knowledge representation problem of expert system for rotary machinery fault diagnosis, semantic net knowledge representation is discussed.
youdao
27. 加强有意引导，关注无意识学习学龄前儿童多对儿歌或者相对旋律简单的音乐类型偏爱。
Strengthen to the guide, pay attention to learning without awareness of preschool children to nursery rhymes or relative melody music types prefer simple.
youdao
28. C300旋转制粒机是用一组相对旋转碾刀，通过不锈钢筛网，把物料挤出颗粒的设备。
ZLXZ-C300 Rotary Granulation Machine uses a set of relatively rotating grinding blade to extrude materials through stainless steel mesh into particles.
youdao
29. C300旋转制粒机是用一组相对旋转碾刀，通过不锈钢筛网，把物料挤出颗粒的设备。
ZLXZ-C300 Rotary Granulation Machine uses a set of relatively rotating grinding blade to extrude materials through stainless steel mesh into particles.
