1. Care must be exercised to avoid damaging the tirebead or inner tube.
要当心不要损坏轮胎轮缘或内胎。
来自互联网
2. This will help keep it from being pinched by the rim, tirebead, or tire lever, when you finish it off.
这可以防止它被轮圈、胎边、撬胎棒夹坏，打完气。
来自互联网
3. Start by removing the wheel from the bike and letting out any remaining air. This will make unseating the tire bead much easier.
首先将车轮从车子上取下来，把剩余的气放掉。这样在扒胎边的时候会容易得多。
来自互联网
4. It may take a few tries, but you should be able to push the last tight bit of tire bead up and over the rim wall with a few strong pushes of your thumb.
这可能有点累，在把最后一小段胎边弄到轮圈里边的时候你的大拇指要用力往里推。
来自互联网
5. QIS has become the supplier of some main domestic tirebead wire producers with large quantities of production of hot rolled wire coil of tire bead wire.
我公司已大批量生产胎圈钢丝用热轧盘条，是国内几家主要胎圈钢丝生产企业的供应商。
来自互联网
6. WeiSteel has become the supplier of some main domestic tirebead wire producers with large quantities of production of hot rolled wire coil of tire bead wire.
我公司已大批量生产胎圈钢丝用热轧盘条，是国内几家主要胎圈钢丝生产企业的供应商。
来自互联网
7. The paper discusses the weaving technology, physical property finger, test result, calender about re-weaving polyamide fibre-66 dipping tire bead cloth and production technology of tire.
介绍再纺锦纶-66浸胶子口布纺丝工艺、物理指标、再纺子口布的测试结果，压延及轮胎生产工艺情况。
来自互联网
8. The causes for the appearance defects on crown, shoulder and bead areas of BTR tire were analyzed and their countermeasures were proposed.
分析全钢载重子午线轮胎胎冠、胎侧、胎肩和胎圈部位外观明疤的产生原因，并提出解决措施。
来自互联网
9. The solution to the bead rim contact problem in FE calculation of tire was described.
介绍轮胎有限元计算中胎圈 轮辋接触问题的处理方法。
来自互联网
10. The application of TBSI accelerator in upper bead filler and carcass compounds of BTR tire was investigated.
研究促进剂tbsi在全钢载重子午线轮胎上三角胶和胎体胶中的应用。
来自互联网
11. An annular, concentrically twisted bead cord is provided which can be reduced in weight while ensuring strength. Also provided are: a process for producing the bead cord; and a vehicle tire.
本发明提供了一种能够在保证强度的同时实现重量减轻的环形同心绞股胎圈帘线及其制造方法、以及车辆轮胎。
来自互联网
12. The bead on one side of the tire should then be pushed in toward the center of the rim.
开始拆卸轮胎时，首先应从内胎中排除空气，轮胎的轮缘一侧应推向轮辋的中心。
来自互联网
13. The influence of anti-scorching agent CTP on blooming from bead chafer of PCR tire was experimentally investigated.
试验研究防焦剂CTP减量对轿车子午线轮胎胎圈护胶喷霜的影响。
来自互联网
14. The bead on one side of the tire should th be pushed in toward the center of the rim.
开始拆卸轮胎时，首先应从内胎中排除空气，轮胎的轮缘一侧应推向轮辋的中心。
来自互联网
15. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange.
可用轮胎工具或扁平的撬棒把轮缘的一端从轮辋辋圈上撬起。
来自互联网
16. The influence of the dimension of hard bead filler on the static mechanical properties of tire was investigated by FEA.
采用有限元分析方法分析了硬三角胶尺寸对轮胎静态力学性能的影响。
来自互联网
17. The different types and sizes of bead wire should be chosen for the different types and sizes of tire.
不同规格品种的轮胎应选择不同规格品种的胎圈钢丝。
来自互联网
18. The application of the low softening point 204 resin in the bead filler compound of BTR tire was investigated.
试验研究低软化点2 0 4树脂在全钢子午线轮胎三角胶中的应用。
来自互联网
19. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem).
可用轮胎工具或扁平的撬棒把轮缘的一端从轮辋辋圈上撬起。
来自互联网
20. To this end, a tire changer that features a mechanical bead pusher for mounting and demounting low-profile tires, ultra-low profile tires and run-flats is a must.
21. To this end, a tire changer that features a mechanical bead pusher for mounting and demounting low-profile tires, ultra-low profile tires and run-flats is a must.
