- 1. Adjusting the seal ring you can get the best seal.
- 调整密封圈的押紧程度，可以获得最佳密封效果。
来自互联网
- 2. Valve is closed twice so that the seal ring can self-center.
- 关闭阀门两次，使得密封环能够自动校准中心。
来自互联网
- 3. The seal ring is placed overhead to extend the service life.
- 密封胶圈上置，延长使用寿命。
来自互联网
- 4. Too much wear with dual-suction seal ring or impeller damaged.
- 双吸密封环磨损过多，或叶轮损坏。
来自互联网
- 5. The seal assembly comprises a seal ring, a seal ring shell and bellows.
- 密封组件包括密封环、密封环壳体和波纹管。
来自互联网
- 6. The seal ring shell has a front piece and a back piece secured together.
- 密封环壳体具有紧固在一起的前件和后件。
来自互联网
- 7. First, the water pump mechanical seal ring on the surface of metal corrosion.
- 第一，水泵的机械密封上金属环表面均匀腐蚀。
来自互联网
- 8. Inspection of the pump shaft seal ring, such as wear parts should be replaced.
- 检查水泵轴的油封环，如磨损严重应更换新件。
来自互联网
- 9. It provides a theoretical basis for designing the mechanical seal ring equipment.
- 这为合理设计机械密封装置提供了理论依据。
来自互联网
- 10. If water seal ring, should check with the stuffing at the top of the range is correct.
- 如有水封环，应检查其与填料函顶部的距离是否正确。
来自互联网
- 11. The interface of the foot portion with the seal ring defines an interference diameter.
- 足部与密封环的交界面限定干涉直径。
来自互联网
- 12. Generally use the soft rubber type sealing ring seal, hard seal ring-type metal seal used.
- 软密封型一般采用橡胶环密封，硬密封型通常采用金属环密封。
来自互联网
- 13. Carbonization is the use of carbon graphite - graphite seal ring when one of the main reasons.
- 石墨炭化是使用碳—石墨环时密封失效的主要原因之一。
来自互联网
- 14. These valves feature an eccentrically mounted disk and a PTFE or 316 stainless steel seal ring.
- 这些阀门具有一个偏心安装的磁盘和聚四氟乙烯或316不锈钢密封环。
来自互联网
- 15. Different body materials and seal ring compound folder layer are suitable for different medium.
- 更换阀体材质和密封圈复合夹层可适用不同介质。
来自互联网
- 16. The result shows that the designed seal ring can meet the application need of the large equipment.
- 结果表明，设计的金属橡胶密封环能够满足某大型设备的应用要求。
来自互联网
- 17. The special support frame can perform connection function and connect cooling water to cool down the seal ring.
- 特殊安装支架，即起到连接作用， 同时又能接通冷却水对密封圈部位进行冷却。
来自互联网
- 18. A primary analysis for cutting force of the tools and the frictional force in rotating seal ring are also given.
- 切削刀具的切削力及密封圈回转摩擦力的初步分析计算。
来自互联网
- 19. And the deployment of fire extinguishing force for seal ring fire and floating roof explosion fire was emphasized.
- 重点对密封圈火灾和浮顶爆炸火灾的火灾力量部署进行分析确定。
来自互联网
- 20. Manufactured by casting polyurethane, main seal ring used in expansion ring testing device for pipeline was designed.
- 采用浇注型聚氨酯材料，设计了一种管道用胀环试样试验台主密封圈。
来自互联网
- 21. As a conclusion, the reasons of vibration are that the oil-seal ring create friction and axles flutter exceed standard.
- 介绍了大型汽轮发电机组密封瓦振动的机理，经试验分析认为产生振动的原因是密封瓦碰磨、大轴晃度超标。
来自互联网
- 22. The shape of the Simplex stern tube seal ring is so complicated that its characters can not be analysed by ordinary methods.
- 船舶尾轴的辛泼来克司密封环形状非常复杂，用一般方法难以进行分析。
来自互联网
- 23. If the residual air in cylinder is impacted by abrupt clamp pressure the seal ring will be damaged due to the effect of diesel oil.
- 如果油缸内残留空气受急剧夹压时，那么，由于液压油的作用，有可能使密封圈烧损。
来自互联网
- 24. The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
- 泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
来自互联网
- 25. The finite element model of rubber dynamic auxiliary seal ring which was installed on the pusher type mechanical seal was established.
- 建立了滑移式机械密封装置上动态辅助橡胶密封圈的有限元模型；
来自互联网
- 26. Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.
- 离心泵的基本构造是由六部分组成的，分别是：叶轮，泵体，泵轴，轴承，密封环，填料函。
来自互联网
- 27. It confirms that tempering quality after being circle checked is the main cause for deformation of the steam seal ring made by rolling.
- 通过分析，确认校圆后的回火质量是钢板卷制汽封圈产生变形的主要原因。
来自互联网
- 28. Former deputy leaves on the cover can reduce the imports of the vortex impeller and particle loss of the wear and tear on the seal ring.
- 前盖板上的副叶片可以减少叶轮进口的旋涡损失和颗粒对密封环的磨损。
来自互联网
- 29. The inventive working seal ring is formed by filling the hollow rubber seal ring with a gaseous material mouth on its side with material.
- 大口径管道柔性内胀式密封圈及连接结构和方法。工作密封圈用侧面装有气料嘴的中空橡胶密封圈内充填物料而形成。
来自互联网
- 30. The inventive working seal ring is formed by filling the hollow rubber seal ring with a gaseous material mouth on its side with material.
- 大口径管道柔性内胀式密封圈及连接结构和方法。工作密封圈用侧面装有气料嘴的中空橡胶密封圈内充填物料而形成。
来自互联网
