- 1. Error writing partition table.
- 写分区表时出错。
来自互联网
- 2. Invalid partition table.
- 无效的分区表。
来自互联网
- 3. Hard Disk Partition table - Error! ! !
- 意思是:“硬盘分区表错误!!!
来自互联网
- 4. Bad partition table.
- 分区表坏。
来自互联网
- 5. Invalid partition table. Setup cannot continue.
- 分区表无效。安装程序无法继续。
来自互联网
- 6. You can display the current partition table with "p."
- 您可以使用“p”来显示当前的分区表。
来自互联网
- 7. The partition table error was successfully fixed!
- 分开桌错误成功地被改正了!
来自互联网
- 8. Hit "p" at any time to preview the new partition table.
- 可以随时按下“p ”预览新的分区表。
来自互联网
- 9. The partition table is located in the master boot record (MBR) of a disk.
- 分区表位于磁盘主引导记录(MBR)之中。
来自互联网
- 10. Either the superblock or the partition table is likely to be corrupt!
- 超级块或者分区表可能被破坏。
来自互联网
- 11. The following example shows how to create partition table with compression.
- 下面的例子展示如何创建采用压缩的分区表。
来自互联网
- 12. It does this by looking through the partition table for an active partition.
- 它是通过在分区表中查找一个活动分区来实现这种功能的。
来自互联网
- 13. Create a Linux Native partition, write the partition table, and exit the (c) fdisk program.
- 创建一个LinuxNative分区,写入分区表并退出(c)fdisk程序。
来自互联网
- 14. The MBR is the first sector on the disk, so the partition table is not a very large part of it.
- MBR是磁盘上的第一个扇区,因而分区表在其中所占空间不大。
来自互联网
- 15. Put this drive in any old x86 Linux box, and you'll find that it has an unknown partition table.
- 将这个硬盘放到一个老的x86Linux机器中,您会看到一个不能识别的分区表。
来自互联网
- 16. Upon system boot the virus will jump from the infected floppy disk to hards partition table.
- 系统被引导后,病毒将从被感染的软盘跳到硬盘分区表。
来自互联网
- 17. Upon system boot, the virus will jump from the infected floppy disk to hards partition table.
- 系统被引导后,病毒将从被感染的软盘跳到硬盘分区表。
来自互联网
- 18. Once it has moved itself, it will proceed to scan the partition table for a bootable partition.
- 一旦它移动好自身,接下来就扫描分区表以寻找一个可启动分区。
来自互联网
- 19. Advocate hard disk from other computers as from disk, restoring the partition table using the software.
- 主张将硬盘接到其他电脑做为从盘,运用有关软件进行分区表恢复。
来自互联网
- 20. After you've created a partition, you should see one (or more) Linux LVM partitions in your partition table.
- 在创建分区之后,应该会在分区表中看到一个(或多个)LinuxLVM分区。
来自互联网
- 21. Proposed to hard disk from other computers as from disk, restoring the partition table using the software.
- 建议将硬盘接到其他电脑做为从盘,运用有关软件进行分区表恢复。
来自互联网
- 22. Proposed to hard disk from other computers as from the plate, using relevant software for the partition table.
- 建议将硬盘接到其他电脑做为从盘,使用相关软件进行分区表恢复。
来自互联网
- 23. You will need to be root or have root authority via sudo, as shown here, to display or manipulate the partition table.
- 要显示或操纵分区表,您需要是root用户,或者通过sudo命令获得root权限,如本清单所示。
来自互联网
- 24. To achieve this, use -j0 (use dd to create partition table) and -t1 (client restores the prebuilt MBR from syslinux).
- 为此,推荐使用-j0(使用dd创建分区表)和- t1(客户机从syslinux恢复预构建的MBR)。
来自互联网
- 25. The IPL interrogates the partition table and subsequently is able to load data wherever it may exist on the various media.
- IPL查询分区表,从而能够加载位于不同介质上任意位置的数据。
来自互联网
- 26. GPT stores all partitions in a single partition table (with backup), so there's no need for extended or logical partitions.
- GPT将所有分区存储在单个分区表中(带有备份),因此扩展分区或逻辑分区没有存在的必要。
来自互联网
- 27. The next sixty-four bytes are the partition table, which contains a record for each of four partitions (sixteen bytes each).
- 接下来的64个字节是分区表,其中包含4个分区的记录(每个记录的大小是16个字节)。
来自互联网
- 28. Thus, it's impossible to differentiate Linux file systems and NTFS or FAT file systems from their partition table GUIDs alone.
- 这样,仅从它们的分区表GUID区分Linux文件系统和NTFS或FAT是不可能的。
来自互联网
- 29. Thus, it's impossible to differentiate Linux file systems and NTFS or FAT file systems from their partition table GUIDs alone.
- 这样,仅从它们的分区表GUID区分Linux文件系统和NTFS或FAT是不可能的。
来自互联网