- 1. The main failure mode were wear or tipping.
- 刀具的失效形式主要是磨损及崩刃。
来自互联网
- 2. The failure mode differs with the fibre hybrid.
- 纤维混杂可以改变材料的破坏模式。
来自互联网
- 3. The failure mode of a group of layered rock slopes.
- 岩石顺层老滑坡群的破坏模式；
来自互联网
- 4. Shear failure is a basic failure mode of borehole rock.
- 井眼剪切破坏是井眼岩石基本破坏形式之一。
来自互联网
- 5. The main failure mode of spherical plain bearings is wear.
- 关节轴承的主要失效形式是磨损。
来自互联网
- 6. DFMEA process can't ensure all the failure mode was covered.
- 失效模式分析不能那个确保涵盖所有的失效模式。
来自互联网
- 7. Corrosion is the primary failure mode of pressurized pipelines.
- 腐蚀失效是压力管道失效的主要模式之一。
来自互联网
- 8. The change of failure mode is the main reason of ductility increment.
- 上述断裂方式的改变是塑性增大的主要原因。
来自互联网
- 9. Developing and auditing Design Failure Mode and Effect Analysis (DFMEA).
- 开发和评审设计失效模式及后果分析。
来自互联网
- 10. The failure mode also greatly influences the mechanical properties of material.
- 不同的破坏模式对材料强度影响很大。
来自互联网
- 11. Compare and contrast the different types of failure mode effects analysis (FMEA).
- 比较与对照不同类别的失效模式影响分析(FMEA)。
来自互联网
- 12. Provide a clearer explanation of the steps to develop a robust Failure Mode Analysis.
- 清楚地说明如何进行强健的失效模式后果分析的各个步骤。
来自互联网
- 13. Resolves the problem of steering screw's reliability calculation in multi-failure mode.
- 解决了螺杆在多失效模式相关时的可靠度计算问题。
来自互联网
- 14. The nonuniform wear is a popular failure mode of separating ring of heavy vehicle clutch.
- 表面非均匀磨损是重载车辆主离合器分离环常见的失效形式。
来自互联网
- 15. For each failure mode, an explicit formula is derived for the prediction of shear strength.
- 对于每一种破坏模式，给出了受剪承载力计算公式。
来自互联网
- 16. Low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk.
- 低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。
来自互联网
- 17. Last. Resolve the problem of Steering Screw's reliability calculation in Multi-failure Mode.
- 解决了螺杆在多失效模式相关时的可靠度计算问题。
来自互联网
- 18. Interface failure is a common failure mode which is observed in reinforced composite materials.
- 界面失效是增强复合材料中常见的失效模式。
来自互联网
- 19. Moreover, the formula to judge the joint failure mode is set up and verified by the test results.
- 此外，还给出了节点破坏形态的判别公式，并用试验结果进行了验证。
来自互联网
- 20. The basic failure mode of borehole is borehole avalanche and shear zone caused by bore instability.
- 井眼基本破坏形式是由于不稳定性造成的井眼岩石崩落坍塌和剪切带。
来自互联网
- 21. Generally, only the plastic failure mode is considered in system reliability analysis of structures.
- 在一般结构系统可靠性分析中往往只考虑构件塑性破坏的单一模式。
来自互联网
- 22. In our use case, one common failure mode was that build interruptions could result in faked still running.
- 在我们的用例中，常见的故障模式之一是因为构建中断而导致faked仍在运行。
来自互联网
- 23. Formulating actions to prioritize avoidance of potential failure mode with high risk identified in DFMEA.
- 制定措施优先减少风险大的潜在失效模式。
来自互联网
- 24. For GUI programs, the hardest part can be recognizing whether the application indicated the right failure mode.
- 对于GUI程序，最困难的部分是辨认出应用程序是否检测出正确的故障模式。
来自互联网
- 25. One bracket in a particularly critical place, a single point failure mode, that bracket was under-designed.
- 有一个在关键地方的托座，出了一个小问题，设计上不完善。
来自互联网
- 26. Thus the entire potential seismic failure mode has not been fully achieved or experienced for concrete DAMS.
- 所以说潜在的破坏方式不完全来自于或验证于混凝土大坝本身。
来自互联网
- 27. It can be done using Failure Mode and Effect analysis (FMEA) or other equal risk identification and analysis system.
- 以上要求可通过“失效模式和影响分析(FMEA)”或其他等同的风险识别和分析系统实现。
来自互联网
- 28. The accuracy degree of the study on the soil pressure and the soil nailing design are determined by the failure mode.
- 破坏模式正确与否关系到土压力研究和土钉支护设计的准确程度。
来自互联网
- 29. The failure mode and failure mechanism for white ceramic DIP's are analyzed, and experimental simulation is performed.
- 简要分析了白瓷双列直插外壳的失效模式和失效机理，并进行了模拟实验。
来自互联网
- 30. The failure mode and failure mechanism for white ceramic DIP's are analyzed, and experimental simulation is performed.
- 简要分析了白瓷双列直插外壳的失效模式和失效机理，并进行了模拟实验。
来自互联网
