1. YL - BZ D型合式半自动箱机采用精良的加工工艺和优质钢材加工制作而成,机械效率每分钟40 -60片。
YL-BZD type pressing type semi automatic box gluing machine using sophisticated processing technology and high-quality steel fabrication, mechanical efficiency per minute 40-60 sheet.

来自互联网

2. 本文是在激光全息无损检测(简称HNDT)高聚物研究中,利用有限元计算方法,对其叠层接缺陷在真空负载荷下形变量进行计算。
The finite element method is used in the study of HNDT for bonding defects of polymeric substances under vacuum-pressure difference.

来自互联网

3. 介绍了化工设备带温带接堵漏的常用方法及其影响因素。结合实例,阐述了该技术在化工设备运行状态下的应用情况。
The general methods and effect factors of adhesive blockage technique on-line operation with temperature and pressure were introduced. Some examples of its application were given.

来自互联网

4. 试验表明,实度、实含水量及土体饱和状态对聚力和内摩擦角有影响,从而使抗剪强度也受到三因素的影响。
Results show that degree of compaction, compaction water content and saturation state of compacted soil have influence on cohesion and Angle of friction of clay, thereby on the shear strength of clay.

来自互联网

5. 土浸水饱和后,缩变形显著增加,抗剪强度和聚力则显著降低。
Soaking leads to a significant increase in compression deformation and a significant reduction in shear strength and cohesion.

来自互联网

6. 当粒、粉粒含量变化时粉土的动强度、振动孔性状及液化后变形特性等问题都值得深入研究。
It is still deserved to study the liquefaction strength and dynamic pore water pressure and post-liquefaction character of silt when the clay particle content and silt particle content change.

来自互联网

7. 作者在计算中考虑了滑油的效应,并对传统的静力学计算方法进行了动力学修正。
The oil pressure-viscosity effect is considered in the calculation, and a modification with dynamic theory is made to the traditional statics calculating procedure.

来自互联网

8. 根据气体动力学原理,对纺法非织造工艺中负拉伸的下吸风装置进行了理论研究,并通过计算风道流场中的各参数,改造下吸风装置。
The spunbond suction drawing system was studied according to the gas-dynamic theory, and it was modified by calculating various air current parameters of the drawing system.

来自互联网

9. 这时只要将嚼过的口香糖,平整于章面上,就能彻底起赃污,维持图章面的清洁。
What is to be done?As long as you press chewed gum on the surface of the seal flatly, it can clear dirt thoroughly and keep seal clean.

来自互联网

10. 为解决裂液的前期降与后期破胶困难的矛盾,研制出了一种新型的水基裂液破胶剂——EB - 1微胶囊破胶剂。
A novel water base gel breaker for fracturing fluid-EB-1 micro-capsule gel breaker is developed, to solve the difficulty of prophase viscosity reducing and gel breaking in the later period.

来自互联网

11. 使用背背佳时,引带扣要全部贴在腰带毛上并实,以防止腰带起毛,并达到最佳拉力。
Back back good use when gluing a belt attached to the belt to all the hair on the sticky and compacted to prevent the belt fluff, and the best pull.

来自互联网

12. 而当粒含量较高时,则相反,且必须在较大实能量的间歇作用下,方可取得较大的干密度。
But when the clay grain content more, the results just are the opposite and it must be under much more effect of compacting energy and then can get heavier dry density.

来自互联网

13. 冻胶裂液是一种报道较少的裂液体系,该裂液具有增能力强、携砂性好、摩阻低、冻胶水化破胶后残渣少等优点。
The system has strong ability of increasing viscosity, good prop-carrying capacity, low frictional resistance, less residue after gel-breaking and so on.

来自互联网

14. 本机适合于冷合大底后的冷却定型工序。
The machine is suitable for dealing with the setting of cool shoes after pressing the outer sole.

来自互联网

15. 天然地震应力降低于室内滑应力降是由围介质刚度引起的。
That the stress drops of natural earthquakes are not as great as that of laboratory experiment is caused by confining, stiffness.

来自互联网

16. 本文针对绥靖油田油井重复裂所生产的返排液,实施了降无害处理,可直接将返排液泵入集输流程。
Based on the well repeated fracturing in Sui-Jing oilfield produced by the fracturing liquid, the implementation of sound processing viscosity can pump directly into the back row of gathering process.

来自互联网

17. 同时含有抗极、抗磨损、防腐蚀和增添加剂。
It contains extreme-pressure, anti-wear, anti-corrosion and adhesion additives.

来自互联网

18. 同时含有抗极、抗磨损、防腐蚀和增添加剂。
It contains extreme-pressure, anti-wear, anti-corrosion and adhesion additives.

来自互联网