The material of furnace is stainless steel and the heating body is molybdenum.
来自互联网
3. 还介绍了炉体冷却水系统的配置及其特征。
The cooling system-disposition and its characteristics are also introduced.
来自互联网
4. 同时介绍煤气炉炉体和煤气喷嘴的设计计算。
Designing calculation of furnace stack and nozzle is studied.
来自互联网
5. 重点介绍了炉体结构及燃烧控制系统的改进。
The improvement of the furnace structure and the combustion control system are introduced.
来自互联网
6. 设备正常运行时，严禁打开电源柜门和炉体的绝缘护板；
When the equipment is normally running, opening the power cabinet door and insulated guard board of furnace body is strictly prohibited.
来自互联网
7. 炉体外罩是有色金属中频炉熔炼炉的主要结构部件之一。
The body enclosure is one of the main structural parts of medium-frequency induction furnace used for nonferrous metals melting.
来自互联网
8. 在锅炉长期停用时，应非常留意炉体外部的防腐颐养问题。
In boiler outage for a long time, should be very wary of the furnace body external corrosion remaining problems.
来自互联网
9. 加热炉体采用圆形皮带传动，正交面置，使系统运行平稳而可靠。
Furnace body using circular belt, orthogonal plane home, allowing the system to run a smooth and reliable.
来自互联网
10. 本文研究了钢构架—悬吊锅炉体系地震反应的一种简化分析方法。
A simplified analytical method of earthquake response for frameWOrk suspended boiler system is discussed in this paper.
来自互联网
11. 可在真空管式电阻炉体安装由多层铜管绕制的横磁线圈，需通水冷却。
May circle the system in the vacuum tubular resistance furnace body installment by the multi-layered copper pipe the horizontal field winding, must let water through cooling.
来自互联网
12. 只需要通过调节面板上的功率旋钮，就可以实现两个炉体之间的功率分配。
Only through adjusting power knob on the panel, the power distribution between the two furnace can be achieved.
来自互联网
13. 加热炉体为垂直升降式，装置一套自升降配置，以便进行炉内的检修工作。
Furnace body is vertical lift type, installation of a self-lifting configuration for furnace overhaul.
来自互联网
14. 主要论述了辊底式无缝钢管退火炉在炉体、燃烧、管道等方面的技术改造。
Retrofitting of furnace body, burners and piping in the furnace is presented.
来自互联网
15. 针对高炉新型炉体冷却结构，设计了物理模型并建立了热态模拟实验系统。
In this paper, physical model is designed and thermal simulation experimental system built for new type cooling and lining structure of BF.
来自互联网
16. 介绍长龄水冷冲天炉的结构及工作原理，分析风眼漏水和炉体挂渣的原因。
The construction and operation principle of a long melting life water-cooled cupola was described.
来自互联网
17. 介绍了火焰焊补技术的特点、设备、焊补料及其在焦炉炉体维护中的应用。
This paper discusses the speciality of the blaze weld, studying and applying of the equipment and material of this technique, detailedly introduces the essentiality in maintenance work of coke-oven.
来自互联网
18. 增压可加速燃烧反应、强化传热，从而缩小锅炉体积，甚至可降低锅炉造价；
It is known that higher Pressure can accelerate combustion reaction, strengthen heat transfer, reduce boiler volume, and even lower boiler cants.
来自互联网
19. 主要介绍了封闭式干燥炉的特点、主要技术参数、炉体构成、加热和控制系统等。
This paper described the characteristics, main technique parameters, the construction of furnace body, heating and contrlo system of close-type drying furnace.
来自互联网
20. LDMC系列离子渗氮(氮化)设备由LD、LDMC系统电源和真空炉体构成。
LD, LDMC series Ion nitrogen (NOx) equipment from the LD, LDMC system power vacuum furnace and pose.
来自互联网
21. 介绍感应加热原理、特点、炉体结构，对感应加热炉的制造工艺作了详细地分析。
The article introduces principle and features of induction heating and structure of furnace particularly analyzes manufacturing engineering of induction_heated furnace.
来自互联网
22. 多年来氯化炉炉体的材料选择一直不能满足生产的需要，制约着产量和效益的提高。
For many years, the materials used in chloride-furnace could not meet the need of production, body and the improvement of quantity and profit of production.
来自互联网
23. 有了合理的炉体结构，再配以自动控制系统，合理的焙烧周期等条件，就能降低能耗。
An reasonable furnace structure completed with an automatic control system and rational baking period and other conditions can lead to a result of energy saving or reduction.
来自互联网
24. 加热炉体由型钢和钢板焊接构成外壳，它的两端部装有耐热不锈钢材制成的气动炉门。
Furnace steel and steel plates were welded body constituted by the shell, and its both ends with heat-resistant material made of stainless steel pneumatic door.
来自互联网
25. 根据宝钢1号高炉的生产实践，论述了高炉长寿与炉体冷却系统的管理有着密切的关系。
A close relation between BF campaign and the control of furnace body cooling equipment is described in light of No. 1 BF production.
来自互联网
26. 这种方法完全不改变原有炉体结构，只是在炉外附加测量系统，使旧设备改造方便快捷。
The renovation of old device is easy, which only needs to append a set of measuring system outside the furnace.
来自互联网
27. 无炉衬冲天炉的特点是炉体除炉缸部分外，不用炉衬，代之以耐热金属材料制成的炉胆；
The liningless cupola is featured by that the furnace shaft, except the hearth section, is not lined but substituted by a heat-exchanging jacket (HEJ)which is made of heat-resistant metal.
来自互联网
28. 控温方式采用可控硅移相调压，采用氮气保护气氛，炉体采用全密封焊接，密封性能优良。
Temperature control means using thyristor surge phase shifter using nitrogen atmosphere furnace used to seal welding, excellent sealing properties.
来自互联网
29. 控温方式采用可控硅移相调压，采用氮气保护气氛，炉体采用全密封焊接，密封性能优良。
Temperature control means using thyristor surge phase shifter using nitrogen atmosphere furnace used to seal welding, excellent sealing properties.
