The burden descent is divided into two parts for revising new burden surface.
来自互联网
2. 粉条末、五料面等熬制而成。
At the end of five material surface and vermicelli etc which.
来自互联网
3. 胶带承料面和非承料面均应设置清扫装置。
Bearing surface and non-bearing surface of rubber belt shall be equipped with cleaning device.
来自互联网
4. 首先，充分利用高炉生产过程检测信息建立料面温度场。
Firstly, the measuring information of BF process is utilized to establish the temperature field of burden surface.
来自互联网
5. 通过对各类影响料面分布的测量参数的信息融合获取料面特征，建立了高炉料面分布模型。
A burden surface distribution model is built by fusing the information of all operation parameters that affect the burden distribution characteristics.
来自互联网
6. 拉延工艺设计主要包括冲压方向调整、压料面和工艺补充部分的设计以及拉延筋布置等工作。
The drawing process planning was mainly referred to the adjustment of press direction, the design of binder face and addendum as well as the layout of draw beads.
来自互联网
7. 操作时采用空料线法(从炉顶打水)，回收高炉煤气，不安装特殊探尺，用风量判断料面行程。
During lowering charge level with water spraying into the blast furnace, the gas is recovered and the charge level is judged by the blast volume not by special stock rod.
来自互联网
8. 此模具的压料面为曲面压边，并利用DYNAFORM分析板料的起皱趋势，确定拉伸筋的位置。
The position of drawing rib was determined according to the analysis on the wrinkling trend of sheet bar made by DYNAFORM software.
来自互联网
9. 此模具的压料面为曲面压边，并利用DYNAFORM分析板料的起皱趋势，确定拉伸筋的位置。
The die was curved surface held down. The position of drawing rib was determined according to the analysis on the wrinkling trend of sheet bar made by DYNAFORM software.
来自互联网
10. 首先建立零件的拉延模型，从冲压方向、工艺补充面、压料面、坯料初始形状等方面进行设计分析。
Firstly, the stamping model of the part is built, and the design is focused on drawing direction, shape of addendum and blank-holder surface, initial shape of blank, and so on.
The system software, developed by VC, comprises communication module, main monitoring module, permeability module, agglomerate Softening-Point module and charge level module.
Shougang No. 2 BF blows for recovery after spraying painting, furnace condition gets right on No. 2 day and coke burden aggravates upwards 5.0 on No. 7 day, furnace condition recovery is rapid.
The research of ignition system in sintering machine, including smoothing raw material layer, low negative pressure ignition, igniting intensification, selection of igniting device, is introduced.
来自互联网
14. 马来西亚早餐- - -一碗热腾腾的面，配有鸡蛋，蔬菜和调味料。
Malaysian breakfast - a hot bowl of Mee - noodles mixed with egg, vegetable and tasty spices.
来自互联网
15. 马来西亚早餐——一碗热腾腾的面，配有鸡蛋，蔬菜和调味料。
Malaysian breakfast — a hot bowl of mee-noodles mixed with egg, vegetable and tasty spices.
来自互联网
16. 这段时间日本媒体纷纷曝料鸠山早年少为人知的具有艺术气质的一面。
Japanese media have been digging up video of Hatoyama's formerly less-known artsy side.
来自互联网
17. 斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目。
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the re.
来自互联网
18. 针对薄层罩面的特点 ，介绍了石安高速公路罩面沥青混合料级配的选择方法。
To counter the feature of overlaying in thin layer , this paper introduces the choice of asphalt mixture gradation used in the covering of pavement of Shi-An Espressway.
Research status of laser reflow on solder bump forming of area array packages are introduced, and experimental analysis on laser reflow of PBGA solder ball is performed.
Automatic upper moulding machine can adjust depth according to upper proportion. Change pressure, speed, time, temperature, etc according tomaterial. The upper can get best effect.
来自互联网
21. 钎料凸台和互连焊点的重熔是面阵封装的关键技术之一。
The manufacture of solder bump is one of the key technologies for area array packaging (AAP).
来自互联网
22. 根据瑞士31条路段的经验，用沥青混合料罩面能够修复与补强水泥混凝土路面。
Capabie reparation & reinforcement of cement concrete roadface with asphalt mixture cover according to experience of Swiss'31-line section of highway.
来自互联网
23. 分别从胶砂强度值、胶砂抗压强度比和比强度指标三方面分析磨细锶渣作为水泥掺合料的活性效应。
Effects of the activity of ground-strontium slag as cement admixture were analyzed from three aspects: mortar strength value, compressive strength ratio of mortar and specific strength indicators.
来自互联网
24. 实践证明在该机床上电解加工方料毛坯，加工出的叶片经专用量具检测，叶片型面精度符合要求。
In practice, square stock was electrochemically machined to form a blade surface, and checked the blade by a special measuring device, satisfactory results were obtained.
The produced edible yeast extract could be used as nutrition intensifying agent, flavor modifying agent and fresh strengthening agent in snack food, health food and aquatic products etc.
来自互联网
26. 电容式传感器理想用于液面监测和给料监测。
Capacitive sensors are ideal for level and feed monitoring.
来自互联网
27. 螺旋托辊：用于清除输送带上的粘料，保持带面清洁。
Spiral roller: Used to remove the sticky material on the conveyor belt, to keep an area clean.
来自互联网
28. 斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
来自互联网
29. 斜楔插板上的斜楔面推动废边的三角槽一侧，使板料向前运动，达到板料定位和自动送料的目的。
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
