Their toughening mechanisms were fine-grain toughening, crack deflection, crack branching and crack microbridging.
来自互联网
2. 利用有限元法对微桥结构的测辐射热计进行了二维热模拟。
Two-dimensional thermal simulations of the microbolometer with a micro-bridge structure by finite element method were done.
来自互联网
3. 超导变厚微桥的电流相位关系可以从金兹堡-朗道方程得到。
The current-phase relation of the variable thickness superconducting microbridges can be derived from the one-dimensional Ginzberg-Landau equation.
来自互联网
4. 用表面硅微加工工艺研制了一种用于薄膜热容测量的新型微桥量热计。
A micro bridge calorimeter fabricated with silicon surface micro-fabrication technology is developed for testing heat capacity of thin films.
来自互联网
5. 超导筒由带狭缝的超导厚膜筒及位于狭缝间并与超导厚膜筒相连的超导微桥组成。
The superconducting cylinder consists of superconducting thick-film cylinder with narrow crevice and superconducting micro-bridge connected to the former.
来自互联网
6. 当复合热释电薄膜红外探测器中绝热层的热导率低于空气的热导率时，它的绝热性能优于微桥结构。
When the thermal conductivity of insulation layer is lower than that of air, its performance is better than that of micro bridge structure.
来自互联网
7. 介绍一种新型气体流量传感器——AWM系列微桥式气流质量传感器在微小气体流量测量中的应用。
Microbridge mass airflow sensors of AWM series, a new kind of airflow sensors, applied in micro airflow measurements is presented.
来自互联网
8. 制作的单晶衬底平面应与晶体001面呈一夹角，沿着晶体001面倾斜的方向刻蚀成超导薄膜微桥。
The prepared monocrystalline substrate plane has an Angle to crystalline 001 plane and superconductive film microbridge is etched in the inclined direction to 001 plane.
Micro speckle interferometry is employed to detect the deformation of the micro beam in the equilibrium and the experimental results are compared with the theoretical prediction.
来自互联网
11. 干预：在前侧方向使肩峰最小化接近肱骨近端，经皮复位骨折，微创使用非接触桥接钢板。
Intervention: minimal anterolateral acromial approach to the proximal humerus, percutaneous fracture reduction, and minimally invasive application of the NCB plate.
来自互联网
12. 目的：描述运用非接触桥接钢板微创治疗肱骨近端骨折。
Objectives: To describe the minimally invasive treatment of fractures of the proximal humerus using the Non-Contact-Bridging (NC plate.
来自互联网
13. 目的探讨经小脑延髓裂入路微创手术切除脑桥背侧病变的疗效。
Objective To observe the trans- cerebellomedullary fissure minimally invasive operation treating lesions of dorsal part of pons.
In order to prevent the cracks that would be likely caused by restricted conditions of the wet-joint, the wet-joint demands using expansive concrete to compensate the shrinkage and creep.
来自互联网
15. 与脑桥诱导缓驰相关的抑制氨基酸释放的变化：在体微透析研究。
Changes in inhibitory amino acid release linked to pontine-induced atonia: an in vivo microdialysis study.
来自互联网
16. 分析结果显示，气压较高时微热板传热以气体导热为主，而气压较低时以支撑桥导热为主；
The results show that heat loss of MHP is mainly determined by gas conduction in high pressure range, while conduction through the supporting beams dominates in low pressure range.
来自互联网
17. 其主电路采用全桥式拓扑结构，以IGBT管为功率开关器件，中频变压器使用微晶磁心。
Full bridge topology was used in the main circuit, IGBT was used as power switching device, and micro-crystal core was used in mid-frequency transformer.
Conclusions:The technique of repairing the porcelain fused to metal restoratives of unlocking porcelain directly in mouth by spot-electrolytic etching is practical.
The structure of micro cantilever bridge, the photolithographic mask and the circuit system of the sensor is designed.
来自互联网
20. 为了克服粘着对微机电系统装配的影响，提出了一种利用液体桥力实现微球转移操作的方法。
A method is presented to manipulate microspheres using liquid bridge forces to overcome the influence of adhesion during micro-electro-mechanical system assembly.
The effects of dimensions of MHP, gas gap, and supporting beams on fabrication and working performance of the sensor are analyzed, and a new sensor structure with unequal beams is designed.
An energy harvesting structure based on rectangle piezoelectric microcantilever was set up and the process of energy transform from vibration to electric was generally analyzed.
An energy harvesting structure based on rectangle piezoelectric microcantilever was set up and the process of energy transform from vibration to electric was generally analyzed.
