The circuit of measuring temperature in the automatic vacuum calorimeter is improved.
来自互联网
2. 利用锥形量热仪研究了表面处理剂对膨胀阻燃体系的影响；
The influence of surface preparation agents on intumescent flame retardant system was researched by cone calorimeter.
来自互联网
3. 最后，通过红外光谱仪、差示扫描量热仪，对接枝物结构进行表征。
Structural Characterization of graft polymer was performed by Infrared spectrograph and differential scanning calorimeter.
来自互联网
4. 在国外，加速量热仪（ARC）已被广泛应用于锂离子蓄电池的研究。
Accelerating rate calorimeter (ARC) is suitable to studying both the thermokinetics and thermodynamics of lithium ion battery.
来自互联网
5. 应用恒温导热量热仪对矿渣水泥和波特兰水泥的水化动力学进行了研究。
Kinetics of hydration for both slag cement and Portland cement were studied by using an isothermal conductive calorimeter.
来自互联网
6. 介绍了四种差示扫描量热仪温度标准物质的研制过程及所取得的研究成果。
The development of four standard reference materials used for calibrating differential scanning calorimeters and the results obtained are introduced.
来自互联网
7. 以酱牛肉中的污染菌为测试菌，利用微量热仪测定了细菌的生长热谱曲线。
In this paper, the thermogram with respect to the growth of bacteria in beef was determined with microcalorimeter.
来自互联网
8. 通过差示扫描量热仪（DSC）测定了合金细化前后的升温曲线和降温曲线。
The heating curves and the cooling curves before and after addition of refiners have been studied by differential scanning calorimeter (DSC).
来自互联网
9. 介绍了C80微量热仪的工作原理及特点，以及在水泥水化热测量方面的应用。
The principles and features of type C80 micro calorimeter and its application in measuring heat of hydration are presented.
来自互联网
10. 用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。
The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.
来自互联网
11. 从使用操作、数据采集处理系统、信息交换等方面对已有的自动化量热仪进行改进。
To improve automation calorimeter from operation, data acquisition and processing systems, information exchange and other aspects are the main research points.
来自互联网
12. 利用动态流变仪和差示扫描量热仪等手段探讨了浸泡发酵对米粉体系理化特性的影响。
The effects on the physicochemical properties of rice flour by soaking fermentation were studied by Dynamic Rheometry and DSC.
来自互联网
13. 采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
来自互联网
14. 采用差示扫描量热仪（DSC）分析了原淀粉和羟丙基淀粉的糊化过程中的热力学性质。
The thermal properties of all the starches during pasting were analyzed by performing DSC.
来自互联网
15. 用红外光谱（FTIR）和示差扫描量热仪（DSC）对产物的结构和性能进行了表征。
The structure and properties of copolymer was characterized by FT-IR and DSC.
来自互联网
16. 本文给出了采用单片机及铂电阻pt 1000为核心器件的高精度恒温式自动量热仪设计。
In this paper, SCM and Platinum -resistor PT1000 are chosen as its core to design the circuit of the isothermal automatic calorimeter.
来自互联网
17. 用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
来自互联网
18. 利用差示扫描量热仪实验研究了几种不同石蜡以及它们的混合物和多元醇二元体系的储热性能。
The thermal storage performances of several kinds of paraffin mixtures and polyalcohols binary systems were studied experimentally by differential scanning calorimeter.
来自互联网
19. BAE系统公司将在这种增强型夜视镜中使用该公司的非冷却微型红外微测辐射热仪传感器技术。
BAE Systems will incorporate its uncooled MicroIR microbolometer sensor technology in the enhanced goggle.
来自互联网
20. 提出了优选量热仪肋片数的分析方法，对量热容器存在最佳气体空间体积的问题进行了分析论证。
The paper presents analysis method of optimizing fin -tube number, and discussion of optimal gas space in calorimeter.
来自互联网
21. 介绍了PARR 6300 量热仪的工作原理、热容量标定、热值计算、使用注意事项及故障分析。
The working principle, thermal capacity calibration, calorific value calculation, attentions in operation and fault analysis of PARR 6300 calorimeter are introduced.
The state of water in soy protein gel was studied by differential scanning calorimetry (DSC) and the effect of potassium chloride, calcium chloride on the state of water of SPI gel was discussed.
The corresponding phenomena after the specimen was aged artificially was studied with the small Angle X-ray scattering and DSC, which are suitable for observing structure relaxation.
Based on the study of melting behavior of thermoplastic polymers tested in the cone calorimeter, a differential numerical model for one-dimensional unsteady burning of polymers was put forward.
Application of differential scanning calorimetry (DSC) to analysis of composition, selection of ingredients and evaluation of quality etc of the compounds were related.
The structure of the liquid crystal compound was confirmed by IR, 1HNMR and elementary analysis. The phase transition temperature of it was measured by DSC.
There are many methods for the determination of solid reation kinetics. Among them, dynamic determination of kinetic parameters by computerized DSC is a time and labour saving and convenient method.
And polarizing microscope, wide-angle X-ray diffraction (WAXD) and differential scanning calorimeter (DSC) were used to study the crystalline of PLA membranes prepared at different conditions.
